This is the Thunder Tiger RL .56H Ringed Helicopter Engine.

FEATURES: XC2 composite coating on cylinder liner to extend engine life and
            an etched criss-cross pattern to minimize friction
          Dual needle carburetor with a heat insulator mount and push-pull
            throttle lever
          Oversized CNC machined red anodized cylinder head
          Three year limited warranty through Hobby Services beginning at date
            of purchase

INCLUDES: Thunder Tiger RL .56H Ringed Helicopter Engine with R3 Redline Glow
            Plug, two head shims, instructions, 2.5 & 3mm hex wrenches

REQUIRES: Fuel: Heli blend with 10-30% nitromethane and 20% lubricant content
          Field equipment

SPECS:    Displacement: 0.553 cu in (9.05 cc)
          Bore: 0.906" (23mm)
          Stroke: 0.858" (21.8mm)
          RPM Range: 2,000 - 21,000
          Output: 2.23 hp @ 17,500 RPM
          Weight: 13.8oz (390g)
          Distance Between Mounting Hole Centers Same Side: 0.71" (18mm)
          Distance Between Mounting Hole Centers Opposite Side: 1.7" (43.5mm)
          Width at Mounting Tabs: 2.04" (52mm)
          Width of Crankcase Below Mounting Tabs: 1.4" (35mm)
          Length from Backplate to Front Bearing: 2.9" (73.4mm)
          Length from Backplate to end of Crankshaft: 4" (102mm)
          Height from Mounting Tab/top of Cylinder Head: 2.9" (73mm)
          Heigth from Crankcase bottom/top of Cylinder Head: 3.5" (90mm)
          Width of Cylinder Head: 1.8" (47mm)

          Carburetor Settings: NOTE, carburetor has been preset at factory and
            should not require large adjustments
              Needle Valve: Three turns open from closed position
              Mixture Metering Screw: No more than 1/2 turn at a time, turn
              clockwise to lean mixture or counter-clockwise to richen mixture

                                                                   jxs 06/28/11
                                                                         ir/jxs