HPI Racing 1/10 Firestorm 10T 2WD Nitro 2.4 RTR

Tower Stock# LXBFDF**  •  Manufacturer Stock# 105865
HPI Racing 1/10 Firestorm 10T 2WD Nitro 2.4 RTR (large view)
Notes from our tech department:
This is the 1/10 scale, glow powered, radio controlled, ready-to-run
HPI Firestorm 10T Off-Road Stadium Truck.

FEATURES

Chassis: Constructed of aluminum, 0.12" (3mm) thick
Drive Type: Two wheel (rear)
Radio: HPI 2.4GHz with waterproof servos
sealed removable receiver compartment with room for a five
cell receiver battery
Engine: HPI G3.0 with pull starter, SG (pilot) shaft with rotary carb
dual stage air filter and glow plug
Exhaust: Dual chamber aluminum tuned pipe with header
Fuel Tank: 2.5oz (75cc) flip top cap
Clutch: Two shoe with 0.8 module 19 tooth clutch bell
Transmission: Single speed with dual pad slipper clutch to protect
the drive train on hard landings
Ball Bearings: Full set included, 16 total
Shocks: Four silicone oil-filled, composite bodied with coil-over
spring
Main Gear: 0.8 module 50 tooth
Gearbox: Sealed, all metal gears
Differentials: Planetary geared, sealed and tunable
Brakes: Piston actuation, fiber disc
Tires: Front-Front Line 2.1" (53mm) wide, 2.2" (57mm) diameter
Rear-Ground Assault tapered pin 2.1" (53mm) wide, 2.2" (57mm)
diameter
Wheels: HPI Scorch 6-spoke 2" (50mm) wide, 2.2" (57mm) diameter
with 12mm step type aluminum hexes
Body: DSX-1 fully painted stadium truck with spoiler
Suspension: Wide track type with captured hinge pins
Caster: Adjustable front and rear, caster/toe-in refers to the angle
of the front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell crank with servo saver
Warranty Period: Two year limited

INCLUDES

HPI Firestorm 10T Stadium Truck, 2.4GHz radio, engine, two glow plugs
air filter, tuned pipe, header, painted body, decals,
wrench, AA batteries, tires, foam inserts, wheels,
19 tooth clutch bell, 50 tooth spur gear, instructions

REQUIREMENTS

Misc. Items: Building and track equipment
Fuel: 2-cycle glow fuel with 20%-25% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.

SPECIFICATIONS

Vehicle-
Length: 16.7" (425mm)
Front Width: 12.8" (325mm)
Rear Width: 12.9" (327mm)
Height: 6.6" (167mm) measured at rear wing
Weight: 4.5 lbs (2055g) approx.
Wheelbase: 11" (279mm) adjustable
Front Tread: 10.8" (274mm)
Rear Tread: 11" (279mm) wheels on-center side-to-side
Front Track: 12.75" (324mm)
Rear Track: 12.9" (329mm) outer edges of wheels
Ground Clearance: 1.4" (35mm)
Gear Ratio: 4.11:1
Body-
Length: 16.4" (416mm)
Width: 6.6" (168mm) at rear wheels (widest point)
5.7" (144mm) ahead of front wheels (thinnest point)
Height: 3.8" (97mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 5x10mm Top Shaft 1 DTXC1535
2 5x10mm Idler Shaft 1 DTXC1535
2 10x15mm Differential 1 DTXC1595
2 5x10mm Clutch 1 DTXC1535

Available in the following color schemes;
Blue and Yellow, HPID65BL
Orange and White, HPID65NL

jxs 06/01/11
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐