Phoenix Model Yak-54 GP/EP ARF 56.1"

Tower Stock# LXBGZM  •  Manufacturer Stock# PH074
  • front/side (see larger view)
  • out of package (see larger view)
Money Saving Combos
 
LZ2740
 
LZ2857
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, glow or electric powered, almost-ready-to-fly
Yak 54 .46 scale Aerobatic Airplane.
Recommended for Intermediate Pilots.

FEATURES

Construction: Built-up balsa and plywood
Covering: High quality heat shrink covering, white and red with
orange yellow, blue and gold accents
Wings: Two-piece wood with aluminum joiner tube
Radio Compartment: Plywood reinforced
Cowling: Painted fiberglass
Canopy: Clear with red frame lines
Wheel Pants: Painted fiberglass
Cockpit features: Detailed and painted pilot figure and instrument
panel decal
Landing gear: Pre-bent 0.14" (3.5mm) aluminum with 2-1/2" (63mm)
treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
pre-bent 0.078" (2mm) thick wire
Spinner: 2.25" (57mm) red plastic
Fuel Tank: 16oz (480cc) approximate
Aileron Control: Dual servo
Hardware: Hinges, wing bolts and all other required fasteners
included
Motor Mount: Nylon

INCLUDES

Prebuilt and pre-covered wings fuselage and tail section, aluminum
main landing gear, tailwheel wire, nylon adjustable engine mount,
main and tail wheels, pre-bent pushrods, hardware package,
fiberglass cowling and wheel pants, clear canopy, pilot figure,
decals, photo-illustrated instructions,

REQUIREMENTS

For glow operation;
Engine: .40 - .46 cu in (6.5 - 7.5cc) 2-stroke
OR .52 cu in (8.5cc) 4-stroke
Muffler: Standard type included with engine
Servos: Five, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder, 1-throttle)

For electric operation;
Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
ESC: 60A
Propeller: 12x8, or 13x6.5
LiPo Battery 4S (14.8V) 30C, at least 4000mAh
Battery Charger: LiPo compatible
Servos: Four, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder)

For glow and electric power;
Radio: Four channel
Servo Extension: One 6" (152mm) for ailerons
Y-Harness: One for aileron servos
Misc. Items: Foam rubber padding, medium fuel tubing, fuel filter,
propeller, building and field equipment

SPECIFICATIONS

Wingspan: 56.1" (1425mm)
Flying Weight: 5.5 - 5.9lbs (2500 - 2700g)
Specs such as Wing Area and Wing Loading are not provided by the
manufacturer
Length: 51.97" (1320mm)
Airfoil: Fully-symmetrical, mid wing mount
Center of Gravity: 3.3-3.5" (85-90mm) Back from the wing's leading
edge at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down 0.31" (8mm) 0.47" (12mm)
Elevator: Up & Down 0.31" (8mm) 0.47" (12mm)
Rudder: Right & Left 1.1" (28mm) 1.6" (40mm)

COMMENTS

If a replacement fuel tank is needed, order the Sullivan 16oz flex
tank (SULQ1743), or the DuBro 16oz tank (DUBQ0216).
Some minor trimming and modifications may be required.

jxs 08/04/11
ir/jxs

Resources
See Tower Catalog page 30.
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐