This is the radio controlled, glow or electric powered, Almost-Ready-to-Fly
                     Giles G-202 .46 scale Aerobatic Airplane.
       Recommended for modelers who have had trainer airplane experience.

FEATURES: Construction: Built-up balsa and plywood
          Covering: Pre-applied Oracover, color scheme is mostly White
            on the fuselage and wings with Red, Yellow, and Blue accents with
            Red wheel pants
          Wings: Two-piece wood, must be joined before installation
          Radio Compartment: Plywood reinforced, easily accessible over wing
          Cowling: Painted fiberglass
          Canopy: Clear, single
          Wheel Pants: Painted fiberglass
          Cockpit features: Detailed and painted pilot figure
          Landing gear: Pre-bent 3/16" (4mm) aluminum with 2-1/4" (57mm)
            treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
            pre-bent 0.078" (2mm) thick wire
          Aileron Control: Dual servo, standard size and torque required
          Hardware: Hinges, wing bolts and all other required fasteners
            included
          Motor Mount: Nylon

INCLUDES: Prebuilt and pre-covered wings fuselage and tail section aluminum
            main landing gear, tailwheel wire, nylon adjustable engine mount,
            main and tail wheels, pre-bent pushrods, hardware package,
            fiberglass cowling and wheel pants, clear canopy, pilot figure,
            decals, photo-illustrated instructions,

REQUIRES:   For glow operation;
          Engine: .46 cu in (7.5 cc) 2-stroke
              OR  .53 cu in (8.7cc) 4-stroke
          Muffler: Standard type included with engine
          Servos:  Five, 42 oz/in torque minimum
            (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
          Propeller: 11x6

            For electric operation;
          Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
          ESC: 60A
          Propeller: 12x8 or 13x6.5
          LiPo Battery 4S (14.8V) 30C, at least 4000mAh
          Servos:  Four, 42 oz/in torque minimum
            (2-ailerons, 1-elevator, 1-rudder)

            For glow and electric power;
          Radio: 4-channel
          Servo Extension: One 6" (152mm) for ailerons
          Y-Harness: One for aileron servos
          Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, building
            and field equipment
          Servo Extension: One 6" (152mm) for ailerons
          Y-Harness: One for aileron servos
          Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium
            fuel tubing, fuel filter, propeller, building and field equipment

SPECS:    Wingspan: 53.1" (1350mm)
          Flying Weight: 6.1lbs (2780g)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Length: 53.9" (1380mm)
          Airfoil: Fully-symmetrical, mid wing
          Center of Gravity: 4.1" (105mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-
            Ailerons: Up & Down   0.40" (10mm)
            Elevator: Up & Down   0.59" (15mm)
            Rudder: Right & Left  1.19" (30mm)

COMMENTS: If a replacement fuel tank is needed, order the Sullivan 12oz flex
            tank (SULQ1741), or the DuBro 12oz tank (DUBQ0212).
            Some minor trimming and modifications may be required.

                                                                    jxs 8/02/11
                                                                         ir/jxs