This is the radio controlled, glow or electric powered,
Phoenix Models Spitfire ARF.
For intermediate to advanced fliers.
FEATURES: Construction: All wood construction
Wings: One-piece with aluminum wing joiner tube
Covering: Factory applied Oracover
Radio Compartment: Plywood reinforced, accessible under wing
Cowling: Painted fiberglass
Canopy: Clear with painted pilot figure
Landing Gear: Retractable
Fuel Tank: Approximately 14oz (420cc)
Aileron Control: Dual servo
Spinner: Red plastic 2.75" (57mm) diameter
Building Time: Ready to fly in several hours
INCLUDES: Pre-built wing, fuselage and tail assemblies, wheels, cowl, engine
mount, fuel tank, hardware package, decal sheet, landing gear,
aluminum wing tube and photo-illustrated instructions
REQUIRES: For glow operation;
Engine: .40 - .46 cu in (7.5 cc) 2-stroke
OR .52 cu in (8.5 cc) 4-stroke
Muffler: Standard muffler supplied with engine-cowl must be cut
Servos: 5-standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
1-retract servo for retract gear
Propeller: 11x6
For electric operation;
Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
ESC: 60A
Propeller: 12x8, or 13x6.5
LiPo Battery 4S (14.8V) 30C, at least 4000mAh
LiPo battery charger and balancer
Servos: Four, 42 standard oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder)
1-retract servo for retract gear
For glow or electric operation;
Radio: 6-Channel
Servo Extension 6": Two for ailerons
Y-Harness: One, for aileron servos
Misc. Items: Propeller, building and field equipment
SPECS: Wingspan: 55" (1400mm)
Weight: 98.7 - 102.2oz (2800 - 2900g)
Length: 48.8 " (1240mm)
Specs such as Wing Area and Wing Loading are not provided by the
manufacturer
Center of Gravity: 3.34" (85mm) back from leading edge of the wing
Control Throws-
Elevator: Up & Down .47" (12mm)
Rudder: Right to Left .78" (20mm)
Ailerons: Up & Down .47" (12mm)
COMMENTS: If a replacement fuel tank is needed, order the Sullivan 14oz flex
tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
Some minor trimming and modifications may be required.
This kit comes with an electric conversion kit that jxs 08/02/11
includes four each blind nuts, standoffs and mounting ir/jxs
hardware. upGX10/14/11
|