This is the TrakPower 7.4V 5400mAh 60C LiPo Saddle Pack.

FEATURES: Ideal for 1/10 scale off-road 4WD buggies

INCLUDES: Two 3.7V Modules, Jumper Lead with 4mm Male Bullets to wire the two
            modules in series and 2mm Female Bullet for Balancing

REQUIRES: LiPo compatible charger and balancer

SPECS:    Rated Pack Voltage: 7.4V (each module is 3.7V)
          Capacity: 5400mAh
          Max Recommended Charge Current: 1C (5.4A)
          Continuous Discharge: 60C (336 amps)
          Watt Hours: 40
          Pack Dimensions: 0.9 x 1.8 x 2.7" (25.1 x 47 x 69mm) each module
          Weight: 11.3oz (321g)
          Discharge Connector: 4mm Female Bullets
          Balance Connector: 2.5mm Female Bullet located on jumper wire

COMMENTS: ALWAYS use a LiPo-approved Charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.20V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
            charging
          ALWAYS Charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts

                                                                   jxs 09/26/11
                                                                         ir/jxs