This is the 1/8 scale radio controlled, glow powered
              RC8.2 Factory Team Buggy Kit from Team Associated.

FEATURES: Chassis: Factory Team 7075 hard anodized aluminum 0.12" (3mm) thick
            with one-piece top plate and molded composite front and rear braces
          Drive: Four wheel shaft drive with CVA boots on center and rear drive
            joints, Factory Team 7075 aluminum axles and center drives
          Shocks: Factory Team 16mm Big Bore oil-filled, hard anodized bodies
            and 4mm titanium nitride coated shafts, steel alloy standoffs
          Shock Towers: Factory Team 7075 aluminum, low center of gravity
            design with optimized geometry, 0.20" (5mm) thick
          Clutch: Machined aluminum racing type, 16 tooth clutch bell
          Air Filter: Low profile elliptical high-flow two stage
          Fuel Tank: Anti-foaming, easily removed with two clips
          Radio Tray: Molded composite with optional forward placement battery
            box for increased steering
          Wheels: Factory Team 3.3" (83mm) diameter dish wheels, white in color
            1.7 (42.2mm) wide
          Body: JConcepts Punisher body with Illuzion wing, low CG wing mount
          Suspension: Newly designed arms with centerline shock mounts and
            optimized anti-roll bar suspension, Factory Team 7075 blue
            aluminum lower suspension mounts
          Steering: Bellcrank type with servo saver, Factory Team 7075 blue
            aluminum knuckles and steering posts
          Caster: Adjustable 14°,16°, or 18° with molded inserts, caster/toe-in
            refers to the angle of the front suspension when viewed from the
            side of the car in relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle

INCLUDES: Associated Factory Team RC8.2 Buggy kit Factory Team shocks, fully
            adjustable wing, pre-assembled front and rear suspension, wheels,
            hard-coated threaded shocks with rubber boots, 44T spur gear, clear
            body, 16 tooth clutch bell, air filter, decals, instructions

REQUIRES: Radio: 2-Channel with 2 Servos
          Radio Batteries: (8) AA size
          Receiver Battery: 4.8-7.4V flat or hump NiMH or 1600-2100 LiPo pack
          Engine: .21 rear-exhaust
          Fuel: 2-cycle glow fuel with 10%-15% nitromethane
          Glow Starter: 1.2 volt
          Starter Box
          Tires: 1/8 scale buggy
          Paint: Lexan specific spray or brush-on
          Misc. Items: Fuel bottle, building and track equipment

SPECS:      Vehicle-
          Length: 18.6" (473mm)
          Width:  12"   (305mm)
          Weight: 6.98 lbs (3167g)
          Wheelbase: 12.7 - 12.8" (323 - 326mm)
          Internal Gear Ratio: 4.30:1
            Body-
          Length:      12.8" (325mm)
          Width:        8"   (204mm) at widest point
          Height:       4"   (102mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty. Bearing Set
             2    8x16mm    Front & Rear Diff          1   DTXC1585
             2    8x16mm    Center Diff                1   DTXC1585
             4    8x16mm    Front Hubs                 2   DTXC1585
             4    8x16mm    Rear Hubs                  2   DTXC1585
             4    6x10mm    Steering                   2   DTXC1561
             2    8x16mm    Front Bulkhead             1   DTXC1585
             2    8x16mm    Rear Bulkhead              1   DTXC1585
             4    15x21mm   Front Suspension           2   ASCC6862
             4    15x21mm   Rear Suspension            2   ASCC6862
             2    8x16mm    Rear gearbox               1   DTXC1585
             2    5x10mm    Clutch                     1   DTXC1535

                                                                   jxs 10/28/11
                                                                         ir/jxs