This is the electric powered, radio controlled 1/10 scale
                   TC-FD Touring Car Kit from Hot Bodies.

FEATURES: Chassis: Carbon graphite 0.098" (2.5mm) thick LiPo compatible with
            carbon graphite upper and middle decks
          Drive: Four wheel belt drive with aluminum driveshafts
          Motor Mount: Aluminum, adjustable front mid-engine layout
          Differentials: Ball type, diff configurations include front ball
            diff with rear spool for drifting, or front spool with rear diff
            for racing
          Shock Towers: Carbon graphite 0.16" (4mm) thick
          Shocks: Aluminum body
          Ball Bearings: Full set
          Steering: Ball bearing equipped bellcrank with carbon graphite
            steering plate
          Spur Gear: Composite construction, 87 Tooth 48 Pitch
          Bumper: Front foam with carbon graphite stopper
          Suspension: Independent with front and rear sway bars
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: TC-FD Touring Car Kit with Shocks, Shock Oil, Bumper, Spur Gear,
            Decals and Instruction Manual

REQUIRES: Radio: 2-channel with high-speed steering servo
          AA Batteries: Four or eight depending on selected transmitter
          Motor: 540 size
          Pinion Gear: 48 pitch
          ESC: Compatible with selected motor
          Battery: 6-cell 7.2V NiMH stick pack, or 2S 7.4V stick LiPo pack
          Battery Charger: To match selected battery
          Wheels: 26mm touring car
          Tires: 26mm touring car type, slick or treaded
          Body: 190mm touring car
          Building and track equipment

SPECS:    Length:    14.4" (365mm)
          Width:      7.5" (190mm)
          Wheelbase: 10.1-10.3" (258-262mm)
          Weight:     3.02lbs (1370g) approximate, race ready

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size               Location         Qty. Bearing Set
             2  3x6x2.5mm flanged Steering Crank       1   DTXC1505
             2  4x7mm             Steering Crank       1   DTXC1507
             2  3x6x2.5mm flanged Belt Tensioner       1   DTXC1505
             2  10x15mm           Spool Diff           2   DTXC1595
             2  10x15mm           Ball Diff            2   DTXC1595
             2  4x7mm             Bulkhead             1   DTXC1507
             2  3x6x2.5mm flanged Bulkhead             1   DTXC1505
             4  5x10mm            Fr Hubs              2   DTXC1535
             4  5x10mm            Rear Hubs            2   DTXC1535

                                                                   jxs 09/12/11
                                                                         ir/jxs