This is the 2.4GHz radio controlled, brushless electric powered, ready to run
                      1/8 scale HPI Vorza Flux HP Buggy.

FEATURES: Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
          Drive: Four wheel shaft with sealed drivetrain
          Motor: Flux Tork 2200kV brushless with aluminum case, machined
            cooling fins, 5mm shaft
          Pinion Gear: 15T steel
          Spur Gear: 48 tooth steel
          Motor Plate: 7075 aluminum  0.12" (3mm) thick with 0.31" (8mm) thick
            billet machined aluminum clamps
          Radio: HPI TF-40 3-channel with end point adjustments, servo
            reversing, steering dual rate and metal gear steering servo
          ESC: HPI Flux Blur Brushless ESC, 6S LiPo compatible with Deans
            battery connectors, 6mm bullet motor connectors and cooling fan
            PC programmable, USB Programming Kit required, order HPIC0573
          Shocks: Oil-filled 16mm Big Bore aluminum bodied
          Shock Towers: Aluminum, 0.16" (4mm) thick
          Differentials: Three with spiral cut gears, oil filled
          Pinion Gear: Hardened steel 15 tooth
          Main Gear: Hardened steel 48 tooth
          Body: Trimmed and painted 1/8 scale buggy body with nylon wing
          Battery Tray: LiPo ready with secure hook and loop straps
          Suspension: Long suspension arms for stability and balance, front and
            rear sway bars
          Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) outer diameter
          Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) diameter
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Warranty: Two-year limited warranty through HPI beginning at date of
            purchase. Warranty valid only in the USA, Canada and South America
            Warranty not valid in the European Union
          Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V (HPIM1996)

INCLUDES: RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
            2.4GHz 3-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

REQUIRES: AA Batteries: Four for transmitter
          Batteries: Two 6-7 cell NiMH flat (not stick packs) at least 4000mAh
            soldered packs only, no welded tabs OR
            two 2S or 3S LiPo with at least 25C rating
          Battery Charger: To match selected batteries
          Connectors: Two Deans Female Ultra Plugs (WSDM1303) if selected
            batteries do not have them
          Track equipment

SPECS:      Vehicle-
          Length: 20" (508mm)
          Width: 12" (205mm)
          Height: 7" (178mm)
          Wheelbase: 12-13/16" (325mm)
            Body-
          Length: 13.1" (334mm)
          Width:   7.71"(196mm)
          Height:  3.8" (98mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty.     Bearing Set
             2   8x16mm   Front Differential          1        DTXC1585
             2   8x16mm   Rear Differential           1        DTXC1585
             4   8x14mm   Front Hubs                  2        DTXC1583
             4   8x16mm   Rear Hubs                   2        DTXC1585
             3   6x10mm   Steering                    2        DTXC1561
             2   8x16mm   Front Diff Case             1        DTXC1585
             2   8x16mm   Rear Diff Case              1        DTXC1585

                                                                   jxs 11/08/11
                                                                         ir/jxs