HPI Racing 1/10 Bullet MT 3.0 Nitro RTR

Tower Stock# LXBRAK  •  Manufacturer Stock# 107006
HPI Racing 1/10 Bullet MT 3.0 Nitro RTR (large view)
Notes from our tech department:
This is the radio controlled, glow powered, ready to run, 1/10 scale
Bullet MT 3.0 Monster Truck from HPI.

FEATURES

Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: TF-40 2.4GHz 3-channel with end point adjustments, dual rates,
servo reverse, waterproof steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
rain cover, two needle composite body slide valve carburetor, and
ABC liner construction, "A"luminum piston with "B"rass cylinder
liner that is "C"hrome plated
Exhaust: Aluminum tuned pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Tires: All terrain 2.6" (67mm) wide, 4.8" (124mm) diameter
Wheels: Five Spoke black chrome finish, 14mm hex, 2.2" (56mm) wide
3.2" (82mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Throttle Servo: SF-10W Waterproof/4.5kg-cm6.0V (HPIM4105)
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.

INCLUDES

RTR HPI Bullet MT 3.0 Monster Truck with Engine, Exhaust, 2.4GHz
Radio, eight AA Batteries, painted Body and Instruction Manual

REQUIREMENTS

Glow Fuel: Car blend nitromethane with 20-25% nitro content
Fuel bottle, glow starter maintenance & track equipment

SPECIFICATIONS

Vehicle;
Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
Body;
Length: 16.3" (415mm)
Width: 6.8" (174mm)
Height: 4.7" (120mm)

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535

jxs 10/19/11
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐