This is the glow powered, 2.4GHz radio controlled, almost ready to fly
                   Thunder Tiger Raptor 30 V2 Helicopter Combo.
             This version includes an iFHSS 2.4GHz Radio System
                         and the PRO 39H (R) Engine.
             For RC Helicopter Pilots 14 Years of Age and Older.

FEATURES: Control System: 90° Collective Cyclic Pitch Mixing (CCPM) with solid
            6mm spindle and 10mm main shaft
          Tail Drive: Belt
          Tail Boom: Aluminum with rigid support with plastic end
          Body: White plastic with applied decals and tinted canopy (color of
            decals may vary)
          Main Blades: Wooden, natural finish with clear protective coating
          Tail Rotor Blades: White plastic
          Radio: 2.4Ghz 6-channel programmable Sky Tech TS6i with digital
            rudder servo, four standard servos, system is trainer compatible
            with #AT1032 trainer cable (not included), Acro/Heli mixing, 8
            model memory
          Gyro: Ace TG7000, heading lock
          Engine: PRO 39H (R) with ringed piston, two needle carburetor,
            Schnuerle porting, glow plug, two ball bearings, aluminum muffler
            with heatsink
          Landing Gear: Nylon with aluminum skids
          Flight Battery: 4.8V 1600mAh NiMH
          Fuel Tank: 11.5oz (340cc)

INCLUDES: ARF Thunder Tiger Raptor 30 V2 Heli with 2.4GHz Radio System, PRO 39H
            (R) Engine, Gyro, Foam Blade Holders, Wall Charger and that is used
            for the receiver battery only and Instruction Manual

REQUIRES: Glow Fuel: Heli blend 15-30%
          Starting Shaft: 6mm hex size
          Electric Starter: 12V .90 size
          AA Batteries: Six for transmitter, NOTE: Wall charger included has
            charge leads for a transmitter and receiver battery. Transmitter
            battery is not included
          Remote Glow Starter
          Building and field equipment

SPECS:    Fuselage Length: 45.27" (1150mm)
          Fuselage Width: 5.51" (140mm)
          Total Height: 15.75" (400mm)
          Main Rotor Diameter: 49" (1245mm)
          Tail Rotor Diameter: 9.3" (236mm)
          Gear Ratio: 1:9.56:4.57
          Fully Equipped Weight: 6.6lbs (3000g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size          Location                 Qty.   Bearing
             1     8x16mm        Drive Gear                 1    DTXC1585
             1     6x12mm        Clutch Bell                1    DTXC1569
             1     6x15mm        Top Starter Shaft          1    ARZC2611
             1    10x19mm        Upper Main Shaft           1    HMXE7293
             3     4x7mm         Washout Assembly           2    DTXC1507
             2     8x12mm        Elevator Arm Control       1    DTXC1581
             2     4x7mm         Aileron Control Lever      1    DTXC1507
             2     4x8mm         Collective Pitch Collar    1    DTXC1511
             4     4x7mm         Mixing Lever               2    DTXC1507
             2     3x8mm         Flybar Assembly            1    Not Carried
             1     5x11mm        Tail Housing               1    DTXC1547
             4     5x10mm        Tail Rotor Hub             2    DTXC1535
             2     6x10mm        Tail Pitch Slider          1    DTXC1561
             2     4x7mm         Tail Pitch Control Lever   1    DTXC1507

                                                                   jxs 12/15/11
                                                                         ir/jxs