This is the glow powered, 2.4GHz radio controlled, almost ready to fly
               Thunder Tiger Raptor 50 S 3D Helicopter Combo.
             This version includes an iFHSS 2.4GHz Radio System
                         and the Redline 53HX Engine.
             For RC Helicopter Pilots 14 Years of Age and Older.

FEATURES: Control System: 90° Collective Cyclic Pitch Mixing (CCPM) with 10mm
            diameter main shaft, and main rotor with 6mm spindle and large
            radial and thrust bearings
          Autorotation gear: Constant drive design allows aerobatics during
            autorotation
          Tail Boom: Aluminum sized to fit 24.4" (620mm) blades
          Body: FRP construction, painted, with decals applied, carbon fiber
            look canopy
          Main Blades: FRP
          Tail Rotor Blades: White plastic
          Radio: 2.4GHz 6-channel programmable Sky Tech TS6i with digital
            rudder servo, four metal gear servos, system is trainer compatible
            with #AT1032 trainer cable (not included), Acro/Heli mixing, 8
            model memory
          Gyro: Ace TG7000 heading lock
          Engine: RL-53HX with two needle valves, knife edge connecting rod
            lightened ringed piston, red machined heat sink head, push-pull
            throttle lever, redline R3 glow plug and Redline hi-flow 3D
            aluminum muffler, black in color
          Linkage System: Push-pull
          Landing Gear: Nylon with aluminum skids
          Flight Battery: 4.8V 1200mAh NiMH
          Fuel Tank: 11.5oz (340cc)

INCLUDES: ARF Thunder Tiger Raptor 50 S Heli with 2.4GHz Radio System, RL-53HX
            Engine, Glow Plug, Gyro, Flight Pack, Wall Charger, Foam Blade
            Holders and Instruction Manual

REQUIRES: Glow Fuel: Heli blend 15-30% nitro content
          Starting Shaft: 6mm hex size
          Electric Starter: 12V .90 size
          12V Battery
          Remote Glow Starter
          Building and field equipment

SPECS:    Fuselage Length: 48.03" (1220mm)
          Fuselage Width: 5.51" (140mm)
          Total Height: 15.74" (400mm)
          Main Rotor Diameter: 52.95" (1345mm)
          Tail Rotor Diameter: 9.29" (236mm)
          Gear Ratio: 8.5:1:4.56
          Fully Equipped Weight: 7.49lbs (3400g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size          Location                 Qty.   Bearing
             1     8x16mm        Drive Gear                 1    DTXC1585
             1     6x13mm        Clutch Bell                1    DTXC1573
             1     6x15mm        Top Starter Shaft          1    ARZC2611
             1    10x19mm        Upper Main Shaft           1    HMXE7293
             3     4x7mm         Washout Assembly           2    DTXC1507
             2     8x12mm        Elevator Arm Control       1    DTXC1581
             2     4x8mm         Elevator Push-Pull Lever   1    DTXC1511
             2     4x7mm         Left Aileron Lever         1    DTXC1507
             2     4x7mm         Right Aileron Lever        1    DTXC1507
             2     6x13mm        Main Rotor Head            2    DTXC1573
             4     4x7mm         Flybar Assembly            2    DTXC1507
             2     4x8mm         Flybar Assembly            1    DTXC1511
             4     5x10mm        Tail Rotor Hub             2    DTXC1535
             2     6x10mm        Tail Pitch Slider          1    DTXC1561
             1     5x11mm        Tail Pulley                1    DTXC1547

                                                                   jml 06.22.12
                                                                   jxs 03/26/12
                                                                         ir/jxs