Cars & Trucks > Car & Truck R/C - Nitro-Powered > Truck R/C Ready-to-Run Nitro-Powered [View Top Sellers for this Category] Bookmark this Page

Thunder Tiger - TTRD2582 TTR6233-F102 6233-F102 719523638756 4719523638756
Manufacturer Stock#
A Closer Look at This Product
  Tech Notes

Accessories Needed

Replacement & Optional Parts

Easy RC: Cars & Trucks

Browse Thunder Tiger

Product Feature Page

Thunder Tiger 1/8 ST-1 4WD Nitro 2.4GHz RTR Purple/Slvr
Click for parts for this item
Thunder Tiger 1/8 ST-1 4WD Nitro 2.4GHz RTR Purple/Slvr
View Larger Picture

Instruction Manuals: Manual 1 (13 MB)

Stock Number
Stock Status

Tech Notes
This is the glow powered powered, radio controlled,
ready to run, 1/8 scale ST-1 Stadium Truck from Thunder Tiger
with Orange and Blue Body.


Chassis: Aluminum 0.14" (3.5mm) thick, gun metal gray in color
composite side guards
Drive: Four wheel shaft with front ball type universal drive shaft
Spur Gear 46 tooth, metal
Engine: Thunder Tiger Pro-28BX-R .28 cu in (4.6cc) with pull starter,
2 needle slide valve carb, glow plug, foam air filter
Tuned Pipe: Anodized natural finish aluminum
Brake: Dual disc fiber
Clutch: Three shoe, composite construction
Clutch Bell: 13 tooth steel
Main Gear: 50T steel
Fuel Tank: 5oz (150cc)
Radio: Ace Jaguar T2P 2-channel 27MHz radio with high-torque steering
servo, transmitter has charge jack
Differentials: Bevel steel gears
Steering: Ball bearing equipped bellcrank type with servo saver
Shocks: Oil-filled aluminum body, 3.5mm shafts
Shock Towers: Aluminum 0.16" (4mm) thick
Body: Trimmed and painted with blue, white and red color scheme
Wheels: Nine spoke chrome, 3.34" (85mm) diameter, 2.2" (55mm) wide
with 17mm hex
Tires: Cube pattern tread, 5.25" (133mm) outer diameter, 2.4" (62mm)
wide with foam inserts
Ball Bearings: Full set
Suspension: Tuned pillow ball front, extra long and rigid suspension
arms for superior handling and better cornering, 3.5mm diameter
front and rear sway bars
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Warranty: Thunder Tiger guarantees this buggy to be free from defects
in both material and workmanship. This warranty does not cover any
components damaged by use or modification. A part or parts missing
from the kit must be reported within 60 days of purchase. No part
or parts will be sent under warranty without proof of purchase


RTR 1/8 scale ST-1 Stadium Truck, .28 cu in engine with pull
starter, glow plug, air filter, tuned pipe, 27MHz radio, high-
torque steering servo, tires, wheels, foam inserts, decal sheet,
wrench, and instruction manual


Fuel: 20% lubricant and 10-30% nitro content, synthetic/castor blend
lubricant recommended (do not use more than 10% nitro content for
AA Batteries: 8 for transmitter
Receiver Pack: 6V, hump configuration
Building and track equipment


Length: 19" (485mm)
Width: 14.8 - 15" (375 - 380mm)
Height: 7.17" (182mm)
Wheelbase: Adjustable from 13.7 - 14.4" (349 - 365mm)
Track Width: Front, adjustable from 13.1 - 13.4" (335 - 340mm)
Rear, 13.4" (340mm), track is the measurement from the
outer edges of the wheels side-to-side
Ground Clearance: 1.9" (48mm)
Weight: 8.6lbs (3920g)
Length: 18.8" (479mm)
Width: 8.2" (209mm)
Height: 4.9" (125mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 8x16mm Front Wheel Hubs 2 DTXC1585
4 8x16mm Rear Wheel Hubs 2 DTXC1585
4 8x16mm Front Differential 2 DTXC1585
4 8x16mm Center Differential 2 DTXC1585
4 8x16mm Rear Differential 2 DTXC1585
4 5x10mm Steering Bellcrank 2 DTXC1535
2 5x11mm Clutch Bell 1 DTXC1547

jxs 12/09/10

– If you need more information, use these Thunder Tiger resources –
Web Site:
Phone: 217-398-8970
  Postal Address:
Thunder Tiger
3002 N. Apollo Drive, Suite #1
Champaign, IL 61822

Click here for Units of Measure Conversion Calculators

Accessories Needed
This is the ready to run, 1/8 scale ST-1 Stadium Truck from Thunder Tiger. FEATURES: .28 engine w/pull starter, 2.4GHz radio w/high-torque steering servo, servo, bevel gear diffs, painted and decaled body, oil-filled shocks, 3-shoe composite clutch, aluminum chassis & shock towers REQUIRES: 10-30% nitro fuel, 8AA batteries, RX pack, track equipment

Accessories for the Thunder Tiger 1/8 ST-1 4WD Nitro 2.4GHz RTR Purple/Slvr

Primary Accessories   Building & Field Equipment Optional Accessories
  Special Stock Number Product Description Parts Saver Eligible Tower's
Low Price
Click to Order Quantity Needed In Cart? Stock
 LXVRH2 Duratrax NiMH 5-Cell 6.0V 1600mAh Hump Rx U
Qty Discount Available
14.99   In Stock
 LXDHJE Duratrax Onyx AA Alkaline Battery (8)
Qty Discount Available
5.49   In Stock
 LXNK66 Futaba FBC19B4 Dual AC Wall Charger
Qty Discount Available
19.99   In Stock
 LXRXC9 Tower Hobbies TOWER Power 20% Car Fuel Quart
Qty Discount Available
10.69   In Stock
Limited Quantities
Subtotal for this Group of Accessories: 51.16  
Click to Order all items listed in this Group of Accessories    Buy This group of Accessories

Primary Accessories   Building & Field Equipment Optional Accessories

Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
See Tower Hobbies Reviews at
Hobbico, Hobby & Model Construction Supplies - Retail, Champaign, IL
We accept the following: We accept the following payment methods: Discover, MasterCard, Visa, American Express, Diners Club International, JCB, China UnionPay, PayPal, and PayPal Credit.
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change. Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.
Copyright © Tower Hobbies All rights reserved. Do not duplicate or redistribute in any form.