Phoenix Model K8B 3500mm Sailplane ARF 137.8"

Tower Stock# LXBYFV  •  Manufacturer Stock# GL03
Phoenix Model K8B 3500mm Sailplane ARF 137.8
Tech Notices:Notice 1
Notes from our tech department:
This is the Almost Ready to Fly K8B 3500mm Sailplane from Phoenix Model.

FEATURES

Construction: Balsa and plywood
Wing: Bolt-on two-piece
Aileron Control: Dual servo
Canopy: Clear
Covering: High quality heat shrink covering
Landing Gear:
with two 3" (75mm) wheels
Assembly Time: 2-4 hours

INCLUDES

Prebuilt Wing, Fuselage, and Tail Sections, Canopy, Wheels, Landing
Gear and Instruction Manual

REQUIREMENTS

Radio: 6-channel with RX, 5 servos (2-ailerons, 1-elevator,
1-towing, 1-rudder)
Servo Extensions: Two 24" for aileron servos
Y-Harness: One for aileron servos
Battery Pack: 6.0V NiMH, at least 1200mAh
Building and field equipment
The following items are required to equip this sailplane with
electric power;
APCQ4120 LP10050E 10X5 THIN ELEC PROP
FPWP2404 LIPO FP25 4S 14.8V 4000 25C
GPMG4725 RIMFIRE .46 42-60-800 OUTRUNR
GPMM1850 SS60 BRUSHLESS ESC 60A HI VOLT
LiPo compatible battery charger and charging bag

SPECIFICATIONS

Wingspan: 137.8" (3500mm)
Length: 64.96" (1650mm)
Weight: 8.1lbs (3700g)
Center of Gravity: 3.1" (80mm) back from the leading edge of the wing
at the fuselage
Control Throws
Aileron: 0.39" (10mm)
Rudder: 1.2" (30mm)
Elevator: 0.31" (8mm)

jxs 06/25/12

Resources
Know Before You Fly
Easy RC: Sailplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info