Additional Pictures:	Picture 1
Instruction Manuals:	Manual 1
Tower Catalog Page:	11
E-mail This Page To A Friend

      This is the radio controlled, glow powered, Almost-Ready-to-Fly,
                  Tower Hobbies Trainer .40 MkII Airplane.
                       For Beginning Modelers/Fliers.

FEATURES: Construction: Balsa, plywood
          Wings: All wood pre-covered, wing attaches to top of fuselage with
            rubber bands, heavy duty plywood wing joiner
          Covering: Factory applied high quality heat shrink film
            Color Scheme: Consists of Red, Blue, and Yellow stripes applied
            diagonally over a White wing. Red covers the lower half of the
            fuselage, the upper half is White separated by Blue and Yellow
            stripes.
          Radio Compartment: Easily accessible, plywood reinforced
          Landing Gear: 4mm (.16") thick fixed wire nosegear and steerable
            nosegear, tricycle style
          Building Time: Ready to fly in several hours
          Warranty Period: Tower Hobbies guarantees this kit free from defects
            in both material and workmanship at the date of purchase.
            This warranty does not cover any component parts damaged by use or
            modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies,
            pre-bent main landing gear, 2-3/4" (70mm) foam main and nose wheels
            metal engine mount, 9oz (270cc) fuel tank, 2" (51mm) White
            spinner, wood servo trays and wing joiners, hardware package, and
            photo-illustrated instructions.

REQUIRES: Engine:  .40-.46 cu in (6.6-7.5cc) 2-stroke
          Muffler: Sports-style, engine mounts in an upright position, muffler
            supplied with engine works fine
          Radio:  Four Channel
          Servos: Four Standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
            (a high torque servo is suggested for the rudder, but not required)
          Servo Extension: One, 6" (152mm)
          Misc. Items: Fuel filter, propeller, building and field equipment

SPECS:    Wingspan:      62"         (1575mm)
          Wing Area:     698 sq in   (45sq dm)
          Wing Chord:    11.25"      (285.75mm)
          Weight:        5 lb        (2268kg) assembled
          Wing Loading:  17 oz/sq ft (52g/sq dm)
          Fuselage Length: 51.5"     (1308mm)
          Airfoil: Flat Bottom High-Wing
          Center of Gravity: 3-1/2" (89 mm) Back from the wing's leading edge
            at the fuselage
          Control Throws-           High Rate       Low Rate
            Elevator: Up & Down     ½"   (13mm)     3/8"  (9.5mm)
            Rudder: Right to Left   1" (25.4mm)       1" (25.4mm)
            Ailerons: Up & Down   5/8"   (16mm)       ½"   (13mm)
          Width of fuselage- 3 3/8"

COMMENTS: For replacement glow engine mount, order HCAG3735.

          If a replacement fuel tank is needed, order the Sullivan 8oz
            tank (SULQ1739), or the DuBro 8oz tank (DUBQ0208). This tank is 1oz
            smaller than the the one included with the kit.
            Some minor trimming and modifications may be required.

                                                                    jxs 4/08/03
                                                                         ir/jxs
                                                               updt jxs 7/28/03
                                                               updt jxs 3/04/05



– If you need more information, use these Tower Hobbies resources –

Click Here: Manufacturer's Product Web Page
E-mail: info@towerhobbies.com
Web Site: http://www.towerhobbies.com/
Phone: 217-398-8970


 
Postal Address:
Tower Hobbies
PO BOX 9078
CHAMPAIGN, IL 61826  








Click here for Units of Measure Conversion Calculators