This is the electric powered, radio controlled, 1/8 scale
                    DEX408 Buggy Kit from Team Durango.

FEATURES: Chassis: Aluminum, 0.12" (3mm) thick, with composite plastic side
            rails
          Drive: Rear wheel
          Differentials: Bevel gear
          Shocks: 15mm Big Bore aluminum body, oil filled
          Shock Towers: 0.20" (5mm) thick aluminum
          Spur Gear: Composite construction 60 tooth 1M
          Suspension: Composite construction arms with front and rear sway bars
          Battery Compartment: Center of chassis, hook and loop battery straps
            for ROAR legal (and larger) stick or saddle pack batteries up to
            1.4" (35mm) thick
          Wheels: Dish type, white in color, 1.7" (42.3mm) wide, 3.2" (80.5mm)
            diameter
          Body: Clear polycarbonate buggy body with black plastic rear wing
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of
            the tops of the tires from vertical when viewed from front or
            behind vehicle

INCLUDES: DEX408 Buggy Kit with Body, Rear Wing, Wheels, Decal Sheet, Diff and
            Shock Oil, Threadlock and Instructions

REQUIRES: Motor: Brushless, at least 1800kV
          Radio: 2-channel with high torque steering servo
          ESC: To match selected motor
          Batteries: Two 2S 7.4V LiPo, at least 5000mAH
          Tires: 1/8 scale buggy with foam inserts
          Battery Charger: LiPo compatible
          Pinion Gear: 5mm, number of teeth to be determined by motor and
            gearing requirements
          Building and track equipment

SPECS:      Vehicle-
          Length: 15.9" (405mm)
          Width:  11.9" (302mm)
          Wheelbase: 12.8 - 13.1" (325 - 333mm)
          Internal Gear Ratio: 3.31:1
          Weight: 119.9oz (3400g)
            Body-
          Length: 12.7" (322mm)
          Width:   6.4" (162mm)
          Height:  3.5" (90mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty.     Bearing Set
             2   8x14mm    Front Diff                 2        DTXC1583
             2   8x14mm    Rear Diff                  2        DTXC1583
             2   10x15mm   Front Driveshaft           1        DTXC1595
             2   10x15mm   Rear Driveshaft            1        DTXC1595
             2   8x16mm    Front Hubs                 1        DTXC1585
             2   12x18mm   Front Hubs                 1        DTXC1597
             2   8x16mm    Rear Hubs                  1        DTXC1585
             2   12x18mm   Rear Hubs                  1        DTXC1597
             4   6x10mm    Steering                   2        DTXC1561

                                                                   jxs 04/13/12
                                                                         ir/jxs