This is the Thunder Tiger 1/8 scale 2.4GHz radio controlled, electric powered
          Ready to Run MT4-G3 Monster Truck with Blue Painted Body.
                    Compatible with most ST-1 series parts.

    **Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Aluminum, 0.12" (3mm) thick
            with molded chassis brace and cover and molded wheelie bar
          Drive: Four wheel with CVD driveshafts
          Motor Mount: CNC machined aluminum
          Motor: Ripper Brushless
          Radio: 3-ch ACE RC Cougar PS3i with metal gear high-torque
            steering servo
          Electronic Speed Control: BLC-150C with Dean's Ultra Male connector
          Shocks: Aluminum body, oil filled
          Differentials: Front, rear and center planetary gear type
          Pinion Gear: CNC machined steel
          Tires:
          Wheels: Two-piece beadlock
          Body: Trimmed and painted
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle
          Warranty: Thunder Tiger guarantees this truck to be free from defects
            in both material and workmanship. This warranty does not cover any
            components damaged by use or modification. A part or parts missing
            from the kit must be reported within 60 days of purchase. No part
            or parts will be sent under warranty without proof of purchase

INCLUDES: Ready to Run MT4-G3 Monster Truck with Painted Body, Motor, Radio,
            ESC, dual Battery Connector with Deans Plugs
            and Instruction Manual

REQUIRES: Batteries: Two LiPo 7.4V 35C hard case
          Battery Charger: Compatible with selected LiPo batteries
          AA Batteries: Eight for transmitter
          Building and track equipment

SPECS:      Vehicle-
          Wheelbase: 14.2" (360mm)
          Weight:     9.2lbs (4180g)
          Length:    21"   (532mm)
          Width:     17.1" (434mm)
          Height:     9.4" (240mm)
            Body-
          Length:    20"   (508mm)
          Width:      7.9" (200mm)
          Height:     5"   (127mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty.  Bearing Set
          The MT-4G3 is available with the following body color schemes;
            Red, TTRD8351
            Blue, TTRD8352

                                                                   jxs 09/25/12