This is the Radio Controlled, Gasoline Powered,
    Almost Ready to Fly Giant 50cc Revolver Airplane Kit from Great Planes.

FEATURES: Construction: Balsa and ply
          Covering: Top Flite MonoKote
          Wings: Two-piece with joiner tube
          Aileron Control: Dual servo
          Cowl: Painted fiberglass
          Wheel Pants: Painted fiberglass
          Fuel Tank: 24oz (720ml), approximate
          Engine Mount: Plywood
          Landing Gear: Two-piece prebent aluminum with two 3.5" (90mm) main
            wheels and one 1-1/2" (38mm) tailwheel, prebent steel tail gear
          Spinner: Aluminum, 5" (127mm) diameter
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit to be free from defects in both materials and workmanship at
            the date of purchase. This warranty does not cover any component
            parts damaged by use or modification.

INCLUDES: Prebuilt Wing, Fuselage and Tail Sections, Decals, Spinner, Landing
            Gear, Fuel Tank, Motor Mount, Engine Mount and Instruction Manual

REQUIRES: Radio: 4 channel minimum, 6-channel recommended
          Servos: Five 99 oz/in torque, 2-elevator, 2-ailerons, 1-rudder
                  Two 50 oz/in torque, 1-throttle, 1-optional choke
          36" (914mm) Heavy Duty Servo Extensions: Two for elevator servos (one
            if using dual servo extension)
          12" (305mm) Heavy Duty Servo Extensions: Three, two for aileron
            servos, one for throttle, two if not using Y connectors from
            receiver to ailerons
          6" (152mm) Heavy Duty Servo Extension: One for choke
          Heavy Duty Dual Servo Lead: Two for elevator and aileron mixing if
            using 4-ch radio
          Heavy Duty Switch Harnesses: Two
          Engine: 50-55cc two stroke
          Propeller: Follow recommendations for engine
          Gasoline and building and field equipment

SPECS:    Wingspan: 90" (2285mm)
          Wing Area: 1303 sq in (84 sq dm)
          Wing Loading: 34-36 oz/sq ft (104-110 g/sq ft)
          Weight: 19.5-20.5lbs (8840-9300g)
          Length: 82.5" (2095mm)
          Center of Gravity (CG): 7-7/8" (200mm) back from the leading edge of
            the wing at the fuselage
          Control Throws:           Low Rate             High Rate
           Elevator: (Up & Down)    1/2" (13mm) 6°       3/4" (19mm) 10°
           Rudder: (Right & Left) 2-3/4" (70mm) 19°    3-1/4" (83mm) 22°
           Ailerons: (Up & Down)    5/8" (16mm) 12°      7/8" (22mm) 17°

COMMENTS: Page 15, step 2 of the manual should read "Drill a pilot hole through
            each of the marks on the template. Remove the template and then
            drill a 13/64" (5.2mm) clearance hole through the firewall on each
            of the four pilot holes you drilled.
            Check the servo tray and formers before flying. If needed, apply
            CA glue to any loose joints.

COMMENTS: If a replacement fuel tank is needed, the Sullivan 24oz Slant Fuel
            Tank (SULQ1444) can be used. Glow tubing in kit must be replaced
            with gasoline-safe fuel tubing. Some trimming and modification to
            airplane may be required.

          Following are the colors of Top Flite MonoKote used to cover this
            model and order numbers for 6' rolls;
             Orange,      TOPQ0202         Sapphire Blue, TOPQ0226
             Missile Red, TOPQ0201

                                                                   jxs 09/19/12
                                                                         ir/jxs