This is the electric powered, radio controlled 1/10 scale
        TC-FD Touring Car Kit with Counter Drive Set from Hot Bodies.
      This version includes the #61788 Counter Drive Pulley and Belt Set

FEATURES: Chassis: Carbon graphite 0.098" (2.5mm) thick LiPo compatible with
            carbon graphite upper and middle decks
          Drive: Four wheel belt drive with aluminum driveshafts, the Counter
            Drive Pulley and Belt Set allow rear wheels to spin up much faster
            than the front wheels which results in aggressive direction changes
            and maximum turn-in on all types of circuits
          Motor Mount: Aluminum, adjustable front mid-engine layout
          Differentials: Ball type, diff configurations include front ball
            diff with rear spool for drifting, or front spool with rear diff
            for racing
          Shock Towers: Carbon graphite 0.16" (4mm) thick
          Shocks: Aluminum body
          Ball Bearings: Full set
          Steering: Ball bearing equipped bellcrank with carbon graphite
            steering plate
          Spur Gear: Composite construction, 87 Tooth 48 Pitch
          Bumper: Front foam with carbon graphite stopper
          Suspension: Independent with front and rear sway bars
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: TC-FD Touring Car Kit with Shocks, Shock Oil, Bumper, Spur Gear,
            Counter Drive Set, Decals and Instruction Manual

REQUIRES: Radio: 2-channel with high-speed steering servo
          AA Batteries: Four or eight depending on selected transmitter
          Motor: 540 size
          Pinion Gear: 48 pitch
          ESC: Compatible with selected motor
          Battery: 6-cell 7.2V NiMH stick pack, or 2S 7.4V stick LiPo pack
          Battery Charger: To match selected battery
          Wheels: 26mm touring car
          Tires: 26mm touring car type, slick or treaded
          Body: 190mm touring car
          Building and track equipment

SPECS:    Length:    14.4" (365mm)
          Width:      7.5" (190mm)
          Wheelbase: 10.1-10.3" (258-262mm)
          Weight:     2.97lbs (1350g) approximate, race ready

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size               Location         Qty. Bearing Set
             2  3x6x2.5mm flanged Steering Crank       1   DTXC1505
             2  4x7mm             Steering Crank       1   DTXC1507
             2  3x6x2.5mm flanged Belt Tensioner       1   DTXC1505
             2  10x15mm           Spool Diff           2   DTXC1595
             2  10x15mm           Ball Diff            2   DTXC1595
             2  4x7mm             Bulkhead             1   DTXC1507
             2  3x6x2.5mm flanged Bulkhead             1   DTXC1505
             4  5x10mm            Fr Hubs              2   DTXC1535
             4  5x10mm            Rear Hubs            2   DTXC1535

                                                                   jxs 09/12/11
                                                                         ir/jxs