Flyzone Mini Switch 2-in-1 Sport EP RTF 31"-34"

Tower Stock# LXCNPV  •  Manufacturer Stock# FLZA3320
Flyzone Mini Switch 2-in-1 Sport EP RTF 31
Tech Notices:Notice 1 Notice 2
Shipping Note:Details
Product WarningDetails
Notes from our tech department:

Flyzone Mini Switch Trainer.
High wing mounting position offers stability for beginners
and is easily switchable to a more aerobatic low wing position
as beginners increase their flying skills.

FEATURES

Construction: Aerocell foam
Wing: Two-piece with carbon wing joiner, can be mounted in either
a mid wing configuration or high-wing configuration with a
different canopy, plug and lock attachment
Aileron Control: Dual servo
Landing Gear: Prebent aluminum
Wheels: Main, foam 1.4" (36mm) diameter, 0.61" (15.5mm) diameter tail
wheel
Wheel Pants: Foam
Cowl: Molded plastic
Radio: Tactic 2.4GHz TTX404 with digital aileron, elevator and rudder
trim (analog throttle trim)
Electronic Speed Control: 20 amp
Spinner: Plastic, 1.5" (38mm) black in color
Motor: 28-30-1100kV brushless
Battery: 3S 11.1V 1300mAh LiPo
Battery Charger: ElectriFly 3S smart charger with AC/DC adapters
Propeller: 8x6 plastic
Warranty: Flyzone guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

INCLUDES

Flyzone Mini Switch Trainer with 2.4GHz radio system, ESC, Motor,
Battery, Battery Charger, Propeller, Prop Adapter, Spinner,
Instruction Manual, four AA Batteries, High Wing and Low Wing
Canopies

REQUIREMENTS

Small slotted and phillips screwdrivers

SPECIFICATIONS

Length: 32.5" (825mm)
Wingspan: High Wing, 34" (865mm)
Low Wing, 31" (785mm)
Wing Area: High, 195 sq in (12.6 sq dm)
Low, 169 sq in (10.9 sq dm)
Wing Loading: 15.1 - 18.1 oz/sq ft (46 - 48 g/sq dm)
Weight: 20.4 - 21.2 oz (580 - 660mm)
Center of Gravity (CG): High Wing Configuration, 2" (51mm) from the
leading edge of each wing panel measured at the fuselage sides
Low Wing Configuration, 2-11/16" (68mm) from wing's leading edge on
top of wings

Control Throws: Set at factory. If the control throws are changed
(not recommended) or to check the throws, use the following
measurements;
High Wing Configuration Low Wing Configuration
Elevator: Up & Down 5/16" (8mm) 16 5/16" (8mm) 16
Rudder: Right & Left 1/4" (6mm) 8 3/8" (9.5mm) 12
Ailerons: Up & Down 5/16" (8mm) 12 5/16" (8mm) 12

jxs 01/18/13
ir/jxs

Resources
See Tower Catalog page 12.
Know Before You Fly
Easy RC: Airplanes
Review #1
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐