This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
        Ready to Run WR8 Flux Ken Block Ford Fiesta Rally Car from HPI.

FEATURES: Chassis: 0.12" (3mm) thick silver anodized aluminum with composite
            front and rear braces and plastic side dirt guards
          Drive: Four wheel shaft
          Radio: HPI TF-40 2.4GHz 3-channel with steering and throttle end
            point adjustment, trim and dual rates, fail safe and SF10W
            waterproof analog steering servo
          Motor: Flux Vektor 4000kV brushless
          ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
            with the #100573 Castle Link USB Programmer, HPIC0573 (not
            included)
          Differentials: Three, adjustable bevel gear type, oil filled
          Shocks: Oil-filled, composite body with rear mud guards
          Suspension: Front and rear sway bars, composite lower suspension arms
            and solid upper links
          Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm)
            diameter
          Wheels: Tarmac Spec plastic 1.4" (35mm) wide, 2.2" (56mm) diameter,
            12mm hex size
          Ball Bearings: Full set
          Pinion Gear: 15 tooth
          Spur Gear: 46 tooth composite
          Body: Trimmed and painted white with all sponsor decals applied
          Bumper: Front foam with plastic raised skidplate that allows car to
            slide over objects in the road
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-Adjustable camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Warranty: 2-year limited through manufacturer, valid only in USA,
            Canada and South America

INCLUDES: HPI RTR WR8 Flux Ken Block Ford Fiesta Rally Car with 2.4GHz Radio
            System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and
            Instruction Manual

REQUIRES: LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
            Deans Female plug
          Battery Charger: Compatible with selected battery
          LiPo Charging Bag
          Building and track equipment

SPECS:      Vehicle-
          Length:    19.1" (485mm)
          Width:      8.9" (227mm)
          Height:     6.8" (172mm)
          Wheelbase: 11.8" (300mm)
            Body-
          Length:    18.9" (480mm)
          Width:      8"   (203mm) behind front wheels, narrowest point
                      9.1" (232mm) at rear wheels, widest point
          Height:     6"   (153mm)

COMMENTS: For Replacement Ball Bearings use:
           Qty.  Size      Location              Qty     Bearing Set
            4   5x10mm     Front Hubs             2       DTXC1535
            4   5x8mm      Rear Hubs              2       DTXC1523
            6   10x15mm    Differentials          3       DTXC1595
            2   5x10mm     Front Diff Case        1       DTXC1535
            2   5x10mm     Rear Diff Case         1       DTXC1535

                                                                   jxs 10/10/12
                                                                         ir/jxs