This is the 1/10 scale Electric Powered, Radio Controlled,
                 TCXX On-Road Touring Car Kit from Hot Bodies.

FEATURES: Chassis: 0.098" (2.5mm) woven graphite extra narrow to prevent
            rubbing in tight corners, fully symmetrical top deck with four
            front and eight rear mounting holes allowing the flex to be tuned
            for different traction levels
          Drive: Four wheel belt, with steel outdrives
          Rear Differential: Bevel gear, allows motors as powerful as 3.5T
            brushless to be used
          Motor Mount: Aluminum, low profile design sits completely under the
            top deck and has two sets of mounting holes
          Suspension: Many of the same suspension parts that the TC kit uses,
            reversible lower arms for extra shock positions, droop screws and
            steel turnbuckles, adjustable wheelbase, track width, anti-squat
            and roll center, super narrow bulkheads with longer top links  for
            faster performance through turns, front and rear 1.2, 1.3 and 1.4mm
            sway bars
          Shocks: Oil-filled aluminum body with 1.1mm 3-hole PTFE pistons
          Bumper: Front foam with carbon graphite stopper
          Spur Gear: Nylon, 115T
          Steering: Twin crank design for more steering throw, aluminum
            bellcrank arms float on metal-shielded ball bearings for efficiency
            and smooth response, woven graphite steering tower bar and
            adjustable Ackerman, Ackerman refers to the inside front turning
            faster than the outside front wheel during turns
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable front and rear, camber refers to the angle of the
            tops of the tires from vertical when viewed from front or behind
            vehicle

INCLUDES: TCXX On-Road Touring Car Kit with Decals,Shocks, Shock Oil, Bumper,
            Spur Gear, and Instructions

REQUIRES: Radio: 2-channel with high-speed steering servo
          AA Batteries: Four or eight depending on selected transmitter
          Motor: 540 size brushed or brushless
          Pinion Gear: 48 pitch
          ESC: Compatible with selected motor
          Battery: 6-cell 7.2V NiMH stick pack, or 2S 7.4V stick LiPo pack
          Battery Charger: To match selected battery
          Wheels: 26mm touring car
          Tires: 26mm touring car type, slick or treaded
          Body: 190mm touring car
          Building and track equipment

SPECS:    Length: 14.4" (365mm)
          Width:   7.5"  (190mm)
          Wheelbase: 10.1-10.3" (258-262mm)
          Weight: 2.97lbs (1350g)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size               Location         Qty. Bearing Set
             2   4x8mm              Spur Gear          1    DTXC1511
             2   10x15mm            Axle Cups          1    DTXC1595
             2   10x15mm            Differential       1    DTXC1595
             4   5x10mm             Front Hubs         2    DTXC1535
             4   5x10mm             Front Hubs         2    DTXC1535

                                                                   jxs 10/08/12
                                                                         ir/jxs