This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run
              Vortex Stadium Truck with Painted Body from Arrma.

FEATURES: Chassis: Twin vertical aluminum plate
            with double chassis rails and alloy front chassis plate, batteries
            fit under chassis-no need to remove body to change batteries
          Drive: Rear wheel with steel driveshafts and axles
          Motor: 15 turn brushed
          Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver,
            transmitter can be converted for left or right hand use, seven
            position adjustable steering wheel, digital trim,
            servo reverse, end-point adjustment and failsafe
          Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff
          Battery: 1500mAh 6-Cell NiMH stick pack with standard connector
          Battery Charger: AC wall type
          Spur Gear: 87 tooth 48 pitch composite plastic
          Pinion Gear: 18 tooth 48 pitch steel
          Receiver Box: Splash and dust proof
          Body: Trimmed and painted "Lick" polycarbonate body
          Transmission: Metal gear, brushless ready
          Slipper Clutch: Machined alloy gears, adjustable for different track
            conditions
          Suspension: Fully independent
          Differential: Metal gear, oil filled
          Shocks: Oil-filled
          Tires: dBoots Dirtrunner with dBoots foam inserts
          Wheels: Five spoke chrome
          Caster: Adjustable caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bellcrank type with composite servo saver
          Warranty: Two year limited warranty beginning at date of purchase

INCLUDES: RTR Vortex Race Truck with Painted Body and 2.4GHz Radio, ESC,
            Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals,
            Instruction Manual, Battery and Charger

REQUIRES: AA Batteries: Four for transmitter
          Building and track equipment

SPECS:      Vehicle-
          Length: 16.7" (425mm)
          Width:  12.6" (320mm)
          Height:  6.3" (160mm)
          Wheelbase: 11.4" (290mm)
          Ride Height: 1.65" (42mm)
          Weight: 3.59lbs (1630g) without battery
            Body-
          Length: 15.9" (403mm)
          Width:   5.9" (149mm)
          Height:  4.5" (115mm)

COMMENTS: Available in the following body colors;
           Blue, ARAD03BB
           Orange, ARAD03NN
           Red, ARAD03RR

          If wanting to upgrade to a brushless motor, the Duratrax Element
            3900kV Brushless Power System (DTXC3122) is a ideal choice.
          The stock 87 tooth 48 pitch spur gear can be used. A 48 pitch
            21T pinion gear (RRPC1021) is recommended.

          For replacement or to upgrade to ball bearings use:
            Qty.  Size      Location        Qty.      Bearing Set
             4   5x10mm     Fr Hubs          2          DTXC1535
             4   5x13mm     Rear Hubs        2          ARAC3201
             2   5x10mm     Idler Gear       1          DTXC1535
             2   5x10mm     Input Shaft      1          DTXC1535
             2   10x15mm    Diff Gear        1          DTXC1595

                                                                   jxs 09/24/12
                                                                         ir/jxs