HPI Racing 1/10 E10 Drift Discount/Falken Nissan RTR

Tower Stock# LXCWGC  •  Manufacturer Stock# 109291
HPI Racing 1/10 E10 Drift Discount/Falken Nissan RTR (large view)
Notes from our tech department:
This is the 1/10 scale electric powered, 2.4GHz radio controlled, ready to run
HPI E10 Discount Tire/Falken Tire Nissan S13 Drift Car.

FEATURES

Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-11 2.4GHz 2-channel pistol grip
Electronic Speed Control: SC-15WP with reverse
Motor: HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: HPI Plazma 7.2V 2000mAh NiMH with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: Falken Azenis RT-615K type A drift
2.48" (63mm) diameter, 1.02" (26mm) wide
Wheels: HRE, chrome finish 2.08" (53mm) diameter, 1.02" (26mm) wide
Bumpers: Front, foam
Body: Pre-painted Nissan S13 coupe with all sponsor and body trim
decals applied
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver

INCLUDES

HPI E10 Discount Tire/Falken Tire Nissan S13 Drift car with
painted body, 2.4GHz radio, ESC, battery, charger, wheels, tires,
27T motor four AA batteries and manual

REQUIREMENTS

Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
Height: 4.25" (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10" (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25" (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25" (184.15mm)
Rear Track: 7.25" (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48" x 1.02" (63x26mm)
BODY-
Length: 17.9" (455mm)
Width: 7.4" (187mm) behind front wheels, narrowest point
8.1" (206mm) at rear wheels, widest point
Height: 4.6" (116mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1 DTXC1597

Body pictured on the box is painted red with Discount Tire/Falken
Tire graphics and sponsor decals.

jxs 10/29/12
ir/jxs

Resources
See Tower Catalog page 91.
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐