This is the Electric Powered, Radio Controlled,
        Ready to Run Team Associated RC10T4.1 off-road Racing Truck.

                 **Includes the Reedy 526-S LiPo Charger**
                **and the Reedy #730 3000mAh LiPO Battery**

FEATURES: Chassis: Molded composite, low center of gravity
          Drive: Rear wheel, with CVDs
          Motor: Reedy 3300kV brushless
          Radio: XP3-SS 3-channel 2.4GHz with SHV1504 metal gear servo
          Electronic Speed Control: XP SC450-BL ESC with LiPo cutoff
          LiPo Battery: #730 Reedy Wolfpack 25C7.4V 3000mAh with Deans
            connector, ASCC0730
          Battery Charger: Reedy #604 526-S AC/DC balancing charger, ASCP0604
          Differential: Ball type with lightweight outdrives
          Transmission: 2.6:1 laydown Stealth type, high-torque capacity
          Bearings: Full set, rubber sealed
          Shocks: Oil-filled blue anodized aluminum (blue springs on front
            and green springs on the rear)
          Front Tires: Associated "Edge" M3 compound 2.2" (56mm) diameter,
            2.5" (63mm) wide
          Rear Tires: M3 compound with square pattern 2.2" (55mm) inner
            diameter, 2.5" (63mm) wide
          Wheels: White (dyeable) dish style 2.2" (56mm) diameter
          Caster: Adjustable front and rear, suspension mounts for 4, 3.5, 3
            and 2.5° rear toe included, caster/toe-in refers to the angle of
            the front when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Angled coplanar design to minimize bump steer and maintain
            constant steering angles throughout the range of suspension travel,
            built-in servo saver
          Body: Painted and trimmed polycarbonate Interceptor-T
          Slipper Clutch: V2 assembly with high-rate spring for more consistent
            adjustment
          Impact-resistant rear motor guard
          Adjustable battery position

INCLUDES: RTR Team Associated RC10T4.1 Truck with Tires, Foam Inserts, Decals
            Painted Body, Instruction Manual, Brushless Motor, ESC, 2.4GHz
            Radio, Metal Gear Steering Servo, 3000mAh Battery, LiPo Charger

REQUIRES: AA Batteries: Eight for transmitter
          Maintenance and track equipment

SPECS:      Vehicle-
          Length:       15.3"  (390mm)
          Width:        12.4"  (316mm)
          Track:        10.6"  (270mm)
          Weight:        3.9lbs (1756g)
          Wheelbase:    11.3"  (288mm)
          Gear Ratio:    2.6:1
            Body-
          Length:       15.1"  (385mm)
          Width:         5.7"  (146mm)
          Height:        4.1"  (104mm)

COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
            affordable upgrade for this vehicle.

         For Replacement Ball Bearings use:
           Qty.  Size          Location            Qty.   Bearing Set
            4  3/8 x 3/16"   Front Wheels           2     DTXC1423
            4  3/8 x 3/16"   Rear Wheels            2     DTXC1423
            4  3/8 x 3/16"   Transmission           2     DTXC1423
            2  5/32 x 5/16"  Diff Outdrives         1     DTXC1411
            2  3/8 x 5/8"    Ball Diff              1     DTXC1437

                                                                   jxs 11/13/12
                                                                         ir/jxs