This is the Mamba Monster 2 25V Electronic Speed Control
        and the Neu Castle 1512 1Y 2650kV Motor, from Castle Creations.

FEATURES:   Neu Castle 2650kV Brushless Motor;
          Ideal for 1/8 scale buggies using 4S LiPO batteries
          High quality oversized ABEC-1 front and rear ball bearings
          Sintered Neodymium magnets
          6.5mm gold connectors with 10 gauge wires (OK to shorten)
            Mamba Monster 2 25V ESC;
          Compatible with on-road, buggies, truggies and monster trucks
            running up to 6S LiPo batteries and weighing up to 15lbs (6.8kg)
          Waterproof design allows running in nearly any environment (see
            COMMENTS below)
          USB programming capability via the Castle Link USB adapter (CSEM6300
          Solder posts allow battery wire length and direction to be easily
            changed
          One year limited warranty through Castle Creations beginning at date
            of purchase. Warranty does not cover abuse, neglect, or damage due
            to incorrect wiring, over voltage or overloading

INCLUDES: Mamba Monster 2 25V ESC with Cooling Fan, On/Off Switch, Fan Plug,
            Motor Wires, Receiver Wire with Connector and Instructions
          2650KV Neu Castle Brushless Motor with 10 Gauge Leads, Connectors
            and Instructions

SPECS:      ESC, CSEM0800
          Input Voltage: 2S-6S LiPo
          Max Continuous Amperage: 120A full continuous operation with cooling
            airflow
          BEC: User selectable output between 5 and 7 volts
          Brake: Proportional
          Revesible: Yes, with lockout
          Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
          Weight: 3.93oz (111.5g) without battery connector
            Motor, CSEC0500
          Max Input Volts: 16.8
          Amp Rating: 120
          Weight: 13.1oz (370g)
          Motor Diameter: 1.57" (39.98mm)
                          1.64" (41.78mm) with fins
          Motor Length: 2.7" (68mm)
          Shaft Diameter: 0.197" (5mm)
          Ball Bearings: Oversize ABEC-1 front and rear
          Connector: 6.5mm gold

COMMENTS: Not intended for use while submerged in liquid. Fan on ESC is not
            water resistant. Remove fan from ESC before exposing vehicle to
            liquids.

                                                                   jxs 01/28/13
                                                                         ir/jxs