Duratrax 1/8 835E Brushless 4WD RTR

Tower Stock# LXDCYH**  •  Manufacturer Stock# DTXD78**
Duratrax 1/8 835E Brushless 4WD RTR (large view)
Notes from our tech department:
This is the Brushless Electric Powered, 2.4GHz Radio Controlled,
1/8 scale Ready-to-Run 835E Buggy from Duratrax.


Chassis: Countersunk anodized aluminum, 0.13" (3.25mm) thick
Drive: Four wheel shaft, with hardened steel driveshaft and gears
Motor: Duratrax Onyx 2200kV brushless
Radio: Duratrax T240FS 2.4GHz with dual rate steering, throttle fail
safe and charge jack
Steering Servo: Waterproof SX501WP digital, metal gear, high torque
Electronic Speed Control: 120A waterproof
Shocks: Big Bore aluminum body, oil-filled with 3.5mm shafts, and
dust boots
Shock Towers: Aluminum 0.16" (4mm) thick
Suspension: Front and rear sway bars, droop screws on front and rear
arms, 0.18" (4.5mm) tie-rod turnbuckles
Body: Trimmed and painted molded polycarbonate with high downforce
wing for traction tuning
Tires: Racing type with rectangular tread and foam inserts
Wheels: White plastic dish type, 17mm hex, 1.7" (42mm) wide, 4.6"
(118mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle, 5mm
diameter camber turnbuckles
Ackerman: Adjustable, Ackerman describes the effect of the inside
front wheel turning faster than the outside front wheel during


RTR 835E Buggy, 2.4GHz Radio System, ESC, Brushless Motor, Painted
Body, Instruction Manual


Battery: 4S hard case LiPo with Deans Ultra Plug connector OR
two 2S hard case LiPo batteries with series adapter and
Deans Ultra Plug
Battery Charger: Compatible with selected batteries
Transmitter Batteries: Four AA
Track and maintenance equipment


Length: 19.9" (505mm)
Width: 11.9" (302mm)
Height: 7.5" (190mm)
Wheelbase: 12.8" (325mm)
Weight: 8.4 lb (3.8 kg) with battery
Length: 13.6" (345mm)
Width: 7.4" (188mm)
Height: 4.1" (104mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
5 8x16mm Differential 3 DTXC1585
2 8x16mm Fr Bulkhead 1 DTXC1585
2 8x16mm Rear Bulkhead 1 DTXC1585
4 8x16mm Fr Knuckles 2 DTXC1585
4 8x16mm Rear Knuckles 2 DTXC1585

Available in the following body colors;
Black, DTXD78LL
White, DTXD78WW
Yellow, DTXD78YY

jxs 02/26/13

Easy RC: Cars & Trucks
Review #1
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐