Team Durango 1/8 DEX408v2 EP 4WD Buggy Kit

Tower Stock# LXDFXU  •  Manufacturer Stock# TD102029
Team Durango 1/8 DEX408v2 EP 4WD Buggy Kit (large view)
Notes from our tech department:
This is the electric powered, radio controlled, 1/8 scale
DEX408V2 Buggy Kit from Team Durango.

**New features compared to the original DEX408 include;**
*New 16mm Big Bore shocks with the option of both
bladder and emulsion style-compatible with all current springs
*New Rear Suspension Arms that work with new DPA rear hubs,
with extra shock mount positions further out for better bump handling
*New Rear DPA Hubs that allow adjustable roll center
*New DPC Front Castor Blocks that balance front to rear grip
*New Rear Shock Tower to fit new suspension arms
*New Narrow Inner Suspension Arm Mounts for better rear traction
*New Rear Bulkhead for rear mounted shocks and swaybar
*New Longer Wing Mount for better stability
*New Composite Diff Cross Pins and Inserts for lighter diff
*New TD Signature Color Anodized Gold Input Shaft Spacer
*Springs and Sway Bars to match PRO team setups


Chassis: Hard anodized aluminum, 0.12" (3mm) thick, with composite
plastic side rails
Drive: Four wheel
Differentials: Bevel gear, with lower diff outdrive than the original
DEX408 for increased efficiency and reduced friction
Shocks: 16mm Big Bore aluminum body, oil filled type (oil not
included), dual tapered piston assembly, with angled-hole pistons
Shock Towers: 0.20" (5mm) thick aluminum
Spur Gear: Composite construction 60 tooth 1M
Suspension: Composite construction arms with front and rear sway bars
new rear suspension arms for improved weight transfer in low
traction surfaces
Battery Compartment: Center of chassis hook and loop battery straps
for ROAR legal (and larger) stick or saddle pack batteries up to
1.4" (35mm) thick
Wheels: Dish type, white in color, 1.7" (42.3mm) wide, 3.2" (80.5mm)
Rear Hub Carriers: Dual position, position one provides higher
traction during cornering, position two provides more progressive
cornering action on high traction surfaces
Body: Clear polycarbonate buggy body with black plastic rear wing
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of
the tops of the tires from vertical when viewed from front or
behind vehicle


DEX408 Buggy Kit with Body, Rear Wing, Wheels, Decal Sheet, Diff and
Threadlock and Instructions


Motor: Brushless, at least 1800kV
Radio: 2-channel with high torque steering servo
ESC: To match selected motor
Batteries: Two 2S 7.4V LiPo, at least 5000mAH
Tires: 1/8 scale buggy with foam inserts
Battery Charger: LiPo compatible
Pinion Gear: 5mm, number of teeth to be determined by motor and
gearing requirements
Shock and diff oil of modeler's choice
Building and track equipment


Length: 15.9" (405mm)
Width: 11.9" (302mm)
Wheelbase: 12.8 - 13.1" (325 - 333mm)
Internal Gear Ratio: 3.31:1
Weight: 119.9oz (3400g)
Length: 12.7" (322mm)
Width: 6.4" (162mm)
Height: 3.5" (90mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x14mm Front Diff 2 DTXC1583
2 8x14mm Rear Diff 2 DTXC1583
2 10x15mm Front Driveshaft 1 DTXC1595
2 10x15mm Rear Driveshaft 1 DTXC1595
2 8x16mm Front Hubs 1 DTXC1585
2 12x18mm Front Hubs 1 DTXC1597
2 8x16mm Rear Hubs 1 DTXC1585
2 12x18mm Rear Hubs 1 DTXC1597
4 6x10mm Steering 2 DTXC1561

jxs 10/25/13

Parts Compatibility
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐