HPI Racing 1/10 E10 Drift 2013 Mustang Falken Tire RTR

Tower Stock# LXDPMY  •  Manufacturer Stock# 111277
HPI Racing 1/10 E10 Drift 2013 Mustang Falken Tire RTR (large view)
Notes from our tech department:
This is the 1/10 scale Electric Powered, 2.4GHz radio controlled, Ready to Run
HPI E10 on-road Justin Pawlak 2013 Falken Mustang Drift Car.


Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-11 2.4GHz 2-channel pistol grip
Electronic Speed Control: SC-15WP with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: HPI Plazma 7.2V 2000mAh NiMH with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: Officially licensed Falken Azenis RT-615K T-drift
2.48" (63mm) diameter, 1.02" (26mm) wide
Wheels: Officially licensed HRE C106, 6-spoke white 2.08" (53mm)
diameter, 1.02" (26mm) wide
Bumper: Front, foam
Body: Pre-painted 2013 Ford Mustang with Falken Tire graphics
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver


HPI E10 on-road 2013 Falken Ford Mustang with painted body, 2.4GHz
radio, ESC, battery, charger, wheels, tires, 27T motor, four AA
batteries and manual


Misc. Items: Building and track equipment


Length: 14.8" (375mm)
Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
Height: 4.25" (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10" (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25" (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25" (184.15mm)
Rear Track: 7.25" (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48" x 1.02" (63x26mm)
Length: 18.5" (470mm)
Width: 8" (203mm) at rear wheels (widest point)
7.5" (190.5mm) behind from wheels (thinnest point)
Height: 4.25" (107.95mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1 DTXC1597

Body pictured on the box is painted green and blue with Falken Tire
graphics and various sponsor decals

jxs 01/09/14

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐