RTR Racing 1/8 Ken Block WR8 Flux Ford Fiesta Rally RTR

Tower Stock# LXDUTM  •  Manufacturer Stock# 112715
RTR Racing 1/8 Ken Block WR8 Flux Ford Fiesta Rally RTR (large view)
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
Ready to Run WR8 Flux Ken Block Ford Fiesta Rally Car from HPI.

FEATURES

Chassis: 0.12" (3mm) thick silver anodized aluminum with composite
front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: 2.4GHz 2-channel system with steering dual rate steering and
throttle, and waterproof analog steering servo
Motor: Flux Vektor 4000kV brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
with the #100573 Castle Link USB Programmer, HPIC0573 (not
included)
Differentials: Three, adjustable bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links
Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm)
diameter
Wheels: Blue in color, 1.4" (35mm) wide, 2.2" (56mm) diameter,
12mm hex size
Ball Bearings: Full set
Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America

INCLUDES

HPI RTR WR8 Flux Ken Block Ford Fiesta Rally Car with 2.4GHz Radio
System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and
Instruction Manual

REQUIREMENTS

LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
Deans Female plug
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Building and track equipment

SPECIFICATIONS

Vehicle-
Length: 19.1" (485mm)
Width: 8.9" (227mm)
Height: 6.8" (172mm)
Wheelbase: 11.8" (300mm)
Body-
Length: 18.9" (480mm)
Width: 8" (203mm) behind front wheels, narrowest point
9.1" (232mm) at rear wheels, widest point
Height: 6" (153mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535

jxs 02/06/14
ir/jxs

Resources
Easy RC: Cars & Trucks
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐