RTR Racing 1/8 Ken Block WR8 Flux Ford Fiesta Rally RTR

Tower Stock# LXDUTM  •  Manufacturer Stock# 112715
RTR Racing 1/8 Ken Block WR8 Flux Ford Fiesta Rally RTR (large view)
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
Ready to Run WR8 Flux Ken Block Ford Fiesta Rally Car from HPI.


Chassis: 0.12" (3mm) thick silver anodized aluminum with composite
front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: 2.4GHz 2-channel system with steering dual rate steering and
throttle, and waterproof analog steering servo
Motor: Flux Vektor 4000kV brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
with the #100573 Castle Link USB Programmer, HPIC0573 (not
Differentials: Three, adjustable bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links
Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm)
Wheels: Blue in color, 1.4" (35mm) wide, 2.2" (56mm) diameter,
12mm hex size
Ball Bearings: Full set
Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America


HPI RTR WR8 Flux Ken Block Ford Fiesta Rally Car with 2.4GHz Radio
System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and
Instruction Manual


LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
Deans Female plug
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Building and track equipment


Length: 19.1" (485mm)
Width: 8.9" (227mm)
Height: 6.8" (172mm)
Wheelbase: 11.8" (300mm)
Length: 18.9" (480mm)
Width: 8" (203mm) behind front wheels, narrowest point
9.1" (232mm) at rear wheels, widest point
Height: 6" (153mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535

jxs 02/06/14

Easy RC: Cars & Trucks
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐