This is the Hobbico VoltWatch Battery Monitor for
                            12V Field Batteries

FEATURES: A quick way to check Field Battery levels
          Mounts on outside of Field Box with included double sided tape
          Push button operation. POWER button must be pushed to activate LEDs
          Red, Amber, and Green LEDs glow to show voltage range from 11-13V
              Red          = 11V or less
              First Amber  = 11-11.4V
              Second Amber = 11.4-11.7V
              First Green  = 11.7-12.1V
              Second Green = 12.1-12.4V
              Third Green  = 12.4-12.8V
              Final Green  = 12.8-13.0V
          Draws amazingly low current - less than 30mA
          Wires are pre-stripped and tinned for easy soldering to battery*
          Two year warranty
INCLUDES: One VoltWatch Battery Monitor for 12V Field Batteries
          One 1x1.5" piece of double-sided servo tape

REQUIRES: Soldering leads to battery terminals*
          Attaching to Field Box with double-sided servo tape

SPECS:    Length:   1.6"   (41mm)
          Width:     .6" (15.6mm)
          Height:   .13"    (3mm)
          Weight:    .35oz  (10g)
          Current Draw: less than 30mA
          Battery lead wire length: 9.5" (241mm) approximately

COMMENTS: Important! Unit may fail if input leads are connected in reverse and
            the button is pushed. Be certain to observe proper polarity when
            plugging in leads.
          *Instructions suggest soldering directly to the battery terminals.

                                                                    jxs 2/24/03
                                                              updated tjt051503
                                                                         ir/jxs