Team Durango 1/10 DEX210v2 Buggy EP 2WD Kit

Tower Stock# LXDXMJ  •  Manufacturer Stock# TD102028
Team Durango 1/10 DEX210v2 Buggy EP 2WD Kit (large view)
Notes from our tech department:
This is the Radio Controlled, Electric Powered, 1/10 scale
Off-Road DEX210V2 Buggy Kit from Team Durango.


Chassis: 0.098" (2.5mm) thick 6061 T-6 aluminum with 25 front
kickup, black plastic side guards
Drive: Rear wheel, with type B rear driveshafts for smoother
driveshaft operation at extreme angles
Gearbox: Type B design with camber link
Shocks: Aluminum body, oil-filled, with additional blank pistons,
new front shorter shock body, new shock piston sizes 2x1.3mm,
2x1.7mm, 3x1.6mm, 3x17mm, plus four blank pistons
Shock Towers: Composite, updated for increased stability during
jumping and landing
Differential: Ball type with longer diff outdrives that original
Body: Clear polycarbonate with high downforce rear wing
Steering: Aluminum rack
Wheels: Dish style, yellow in color 2.2" (56mm) diameter, rear 1.4"
(36mm) wide, front 0.94" (24mm) wide, 14mm hex
Suspension: Updated rear arms allow multiple shock mounting positions
and reverse mounting of rear arms, newly designed front arms and
geometry for increased ground clearance, type B mounts for
increased durability, new Dimec X ball cups
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle, new
inboard camber link position and strengthened mounting position


DEX210V2 Buggy Kit with Wheels, Body, Rear Wing, Decals, Instruction
Manual and Diff Grease


Radio: 2-channel with high torque steering servo
Motor: Brushless, at least 3600kV
Pinion Gear: 48P, number of teeth to be determined by motor and
gearing requirements
ESC: To match selected brushless motor
Battery: 2S LiPo, at least 5000mAh
Battery Charger: Compatible with selected LiPo battery
Tires: 1/10 scale buggy
Shock Oil: Silicone type
Building and track equipment


Length: 13.2" (335) mid, 14.5" (368mm) Rear
Width: 9.6" (245mm)
Wheelbase: 10.5 - 10.8" (266 - 274mm)
Internal Gear Ratio: 2.6:1
Weight: 58.2oz (1650g)
Length 11.2" (285mm)
Width: 5.3" (135mm)
Height: 2.8" (70mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3x7mm Steering 2 TDRC1244
2 5x13mm Rear Hubs 1 TDRC1290
2 10x15mm Rear Hubs 1 TDRC1340
4 5x10mm Front Hubs 2 DTXC1535
2 10x15mm Ball Diff 1 TDRC1340
1 5x8mm Gearbox 1 TDRC1280
4 5x10mm Gearbox 2
1 5x11mm Motor Plate/Gearbox 1 DTXC1547

jxs 10/08/13

Parts Compatibility
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐