View Larger Picture

Instruction Manuals:	Manual 1 (1.0 MB)
Tower Catalog Page:	177
E-mail This Page To A Friend

               This is the Futaba 2PL AM Computer Radio system
           with one S3003 Servo and MC230 Electronic Speed Control.

FEATURES: One-button programming for fast and easy menu access
          Ten model memory stores and selects preset programming for up to ten
            different models
          One trim switch allows setting and adjusting trims without returning
            to the menu
          Steering dual rate strategically located on the grip close to the
            trigger offers more mid-range control, crucial when cars are going
            into corners
          Steering/Throttle End Point Adjustment (EPA) limits servo travel for
            more control and to prevent servo damage
          ABS braking initiates ON and OFF pulsing for less skidding and can be
            set for slow, mid, or fast pulsing

INCLUDES: One 2PL AM Transmitter with crystal
          One R142JE receiver with crystal
          One MC230CR Speed Control
          One S3003 Standard Servos with installed X style servo horns
          One Switch Harness
          One Servo Accessory pack
          Instruction Manual

REQUIRES: 8 AA NiCds for the transmitter (order 1 SANP3501)
          4 AA NiCds for the receiver  (order 1 FUGP7300)

SPECS:   S3003 Servo
           Speed:     0.23 sec/60° @ 4.8V or .19 sec/60° @ 6V
           Torque:    44.3 oz-in @ 4.8V or 56.8 oz-in @ 6V
           Size:      1.59"L x .78"W x 1.42"H (40.4x19.8x36mm) w/o output
                      shaft
           Weight:    1.31oz (37.2g)
           Connector: "J" type with approx. 5" lead

         MC230 Speed Control
           Capacity:          6 to 7 cell batteries
           Motor Limit:       20+ turns
           Current- Forward:  90A      Reverse: 45A
           On resistance:     .0035 ohms
           High Frequency:    Yes, 1,500Hz
             Connectors:        Futaba J, Standard for Battery, Bullet Motor
                                (all pre-installed)
             Bullet Motor Wire: 16 gauge
             BEC:               Yes
             Length:            1.07" (27.1mm)
             Width:              .50" (12.7mm)
             Height:            1.31" (33.3mm)
             Weight:            1.55oz (44g)
                                                                    jxs 7/15/03
                                                                         ir/jxs
                                                                      updtd120
                                                                         kkh



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators