Tamiya 1/10 Blackfoot Xtreme Kit

Tower Stock# LXFSG8  •  Manufacturer Stock# 58312
Tamiya 1/10 Blackfoot Xtreme Kit (large view)
Notes from our tech department:
This is the 1/10 scale electric powered, radio controlled, 2 wheel drive
Tamiya Blackfoot Xtreme off-road Monster Truck Kit.


Chassis: Polycarbonate monocoque
Drive: Rear wheel drive
Motor: Stock type, pre-installed on gearbox with leads attached
Bushings: Fully equipped throughout kit except for two ball bearings
on the differential gear, can be fully equipped with bearings see
Shocks: Friction, (not oil-filled) plastic bodied with coil-over
Gearbox: Closed rear, preassembled
Differential: Planetary gear
Transmission: Single-speed
Tires: Spiked 5.1" (130mm) outer diameter, 2.1" (53mm) wide,
2.12" (54mm) inner diameter
Wheels: Yellow, six swept spoke 2.1" (54mm) diameter, 1.9" (48.5mm)
Speed Control: Electronic, Tamiya TEU-101BK
Body: Molded Black plastic pickup truck style with Brown tinted
windows, chrome finish plastic roll bar, grille, front and rear
Decals: Peel and stick body and light accents and sponsor decals
Bumpers: Front, Black plastic
Suspension: Fixed non-adjustable
Camber Tie Rods: Fixed non-adjustable vertically
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Steering: Bell-crank type
Servo Saver: Included


Tamiya Blackfoot Xtreme with friction shocks, motor, Electronic Speed
Control, molded Black body, tires, wheels, 18 tooth pinion gear,
decals, roll bar, instructions


Radio: 2-channel with One standard size servo
Radio Batteries: (8) AA size
Battery: 6-cell flat pack w/ standard connector (7-cell will not fit)
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment


Length: 17.5" (445mm)
Width: 12.2" (310mm)
Height: 10.5" (267mm)
Weight: 4 lbs (1840g) approx.
Tires-Front, Rear: 5.1" x 2.1" x 2.12" (130mm x 53mm x 54mm)
Length: 15.6" (397mm)
Width: 6.75" (171mm) at rear wheels (widest point)
6.25" (158mm) behind from wheels (thinnest point)
Height: 4.5" (114mm)


For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(4) 5 x 11mm rear axles (use 2 DTXC1547)
(4) 5 x 11mm front axles (use 2 DTXC1547)
(6) 5 x 11mm diff gearbox (use 3 DTXC1547)

Body pictured on the box is molded in Black with Neon Pink body
accents and all body trim decals applied
jxs 12/30/03

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐