SuperTigre GS-45 Dual BB ABC w/Muffler

Tower Stock# LXFV71  •  Manufacturer Stock# 11003462
SuperTigre GS-45 Dual BB ABC w/Muffler (large view)
Notes from our tech department:
This is the GS45 ABC Sport Engine from SuperTigre.

*** 3-YEAR Warranty ***


ABC cylinder and piston (An "A"luminum piston with a "B"rass
"C"hromed cylinder sleeve)
Two crankshaft ball bearings
Schnuerle porting
A NEW silent muffler
One-piece crankcase
A twin-needle throttled carburettor


One Glow Plug
One Silent Muffler with Header
One Set Operating Instructions
One parts list
One Set SuperTigre Decals


Bore: 21.85mm (.860")
Stroke: 20mm (.787")
Weight w/o muffler: 377g (13.22oz)
Weight with muffler: 524g (18.5oz)
Displacement: .46 cu in (7.5cc)
Power Output: 1.45 BHP at 16,000 RPM
RPM Range: 2,500-16,000
Width between centers of mounting holes: 42mm (1.65")
Length between centers of mounting holes: 19mm (.75")
Width of crankcase excluding mounting flanges: 34mm (1.34")
Length from backplate to front of drive washer: 83mm (3.15")
Height from bottom of crankcase to top of head: 85mm (3.35")
Crankshaft Thread Size: 1/4-28
Suggested Props: 10x6 or 9.5X6
10x7 for break-in
Carb Settings: H-2-turns out from closed position.
L- Take carb off, rotate and look at bottom side.
Turn trottle until wide open, set tip of low end
needle half-way across cat eye.


FUEL: 18% oil content MINIMUM. A synthetic/castor blend is highly
recommended. 10%-15% Nitromethane will work well. Higher levels of
of Nitromethane may require adjustment of the compression ratio to
prevent detonation.
MGC 8-22-00
JBN 8.10.94
updt jxs 2/12/04
updt lmm 3/26/08

Easy RC: Engines
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐