This is a Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
Phoenix Models Strega .40 Sport Scale Airplane.
For Intermediate to Advanced Modeler/Fliers.
FEATURES: Construction: Balsa and plywood
Wings: Two-piece all wood
Covering: Factory applied Oracover
The covering is all Orange except for the stabilizer top surface,
it has a White stripe on each side
Radio Compartment: Preinstalled servo tray
Cowling: Pre-painted, Orange, fiberglass
Canopy: Painted Silver and preinstalled
Landing Gear: Fixed gear
Aileron Control: Dual servos
Building Time: Ready to fly in only 4-6 hours
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent 5/32" main landing gear, 1/16" tailwheel wire,
2-1/4" (57mm) main wheels, 1" (26mm) tailwheel, metal one-piece
engine mount 10oz (296cc) fuel tank, 2-1/4" (57mm) spinner, wood
servo tray and wing joiner, hardware package, photo-illustrated
instructions, and foam rubber
REQUIRES: Engine: .40-.46 cu in (6.5-7.5cc) 2-stroke
OR .48-.53 cu in (7.9-8.7cc) 4-stroke
Radio: 4- Channel
Servos: 5- Standard, 1-throttle, 1-rudder, 1-elevator, 2-aileron
Misc. Items: Glow plug, medium fuel tubing, fuel filter, propeller,
building and field equipment.
SPECS: Wingspan: 54.5" (1385mm)
Weight: 5.2lb (2360g)
Length: 46.6" (1185mm)
Specs such as Wing Area and Wing Loading are not provided by the
Airfoil: Fully symmetrical, low-wing
Center of Gravity: 4-15/16" (125mm) Back from the wing's leading edge
Elevator: Up & Down 1/4" (6.35mm)
Rudder: Right to Left 1-3/16" (30mm)
Ailerons: Up & Down 1/4" (6.35mm)
COMMENTS: If a replacement fuel tank is needed, order the Sullivan 10oz flex
tank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
Some minor trimming and modifications may be required.