Construction: All balsa and plywood
Wings: one piece, all balsa
Covering: Factory applied iron-on (White with Light Blue, Blue,Black,
and Pink accent colors)
Radio Compartment: plywood construction
Canopy: tinted polycarbonate construction
Landing Gear: pre-bent wire main gear and pre-bent wire tailgear
Aileron Control: Dual servo
Building Time: Ready to fly in only 8-10 hours.
Warranty Period: Tower Hobbies guarantees this kit free from defects
in both material and workmanship at the date of purchase.
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent 3/16" main landing gear wire, 2.5" main wheels, 1" tail-
wheel, adjustable engine mount(nylon construction), 8oz fuel tank,
CA style hinges, wood servo trays, tinted canopy, hardware package,
and photo-illustrated instructions.
Engine: .32-.46 (5.0-7.5cc) 2-stroke
.40-.52 (6.5-8.5cc) 4-stroke
Muffler: Sports-style supplied with engine
(Engine mounts in an upright position)
Servos: 5-standard size (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
Y-Harness: 1 needed for aileron servos
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
Wingspan: 48" (1219mm)
Wing Area: 618 sq in (39.9 sq dm)
Weight: 3.5 - 4lb (1587 - 1814g)
Wing Loading: 15 oz/sq ft (46 g/sq dm)
Fuselage Length: 44" (1120mm)
Airfoil: Semi-symmetrical mid-wing
Center of Gravity: 3¾" (95mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate
Elevator: Up & Down ¾" (19mm) ½" (13mm)
Rudder: Right to Left 1¼" (32mm) 1¼" (32mm)
Ailerons: Up & Down ¾" (19mm) ½" (13mm)
This model does not include a spinner. Order GPMQ4520 if needed.
Conversion to electric power is not recommended for this model
because there is not enough room in the fuselage for the batteries
without major modification.
If a replacement fuel tank is needed, order the Sullivan 8oz
tank (SULQ1739), or the DuBro 8oz tank (DUBQ0208).
Some minor trimming and modifications may be required.
updt jxs 3/07/05