This is the Radio Controlled, Glow or Gasoline Powered, Ready-to-Cover,
          Top Flite P-51D Mustang 1/5 scale Sport Model Airplane Kit.
                  For intermediate to advanced modeler fliers
                  who want to create their own covering scheme.
                           84.5" IMAA legal wingspan

FEATURES: Construction: Fully sheeted balsa and plywood with unpainted
            fiberglass fillets
          Wing: One-piece, built up wood frame which is then sheeted with wood
          Radio Compartment: Easily accessible, plywood reinforced
          Cowling: Fiberglass, unpainted
          Canopy: Clear, single,
          Landing Gear: Fixed heavy duty wire (¼"), but is also set up to use
            optional Robart retracts with functional landing gear doors, see
            COMMENTS
          Dual Wing Servos: Two servos per wing half (1 Flap, 1 Aileron)
          Spinner: 5" (127mm) Aluminum
          Cockpit Kit: ABS plastic with decals
          Building Time: Ready to fly in only 30-35 hours.
          Warranty: Top Flite Models guarantees this kit free of defects
            in material and workmanship at the date of purchase. Warranty
            does not cover any component parts damaged by use or modification.

INCLUDES: Pre-built wings, fuselage and tail assemblies, pushrods,
            pre-bent ¼" (6mm) fixed main landing gear, 5" (127mm) main wheels
            2" (51mm) tailwheel, adjustable engine mount, 32oz (960cc) fuel
            tank,  5" (127mm) spinner, wood servo trays and wing joiner,
            extensive hardware package and photo-illustrated instructions

REQUIRES: Engine: 2.1 -2.8 cu in (34.5 - 46cc) 2-stroke
              OR  2.5 -4.3 cu in (41-70 cc) spark ignition gasoline engine
          Muffler: Pitts style
          Radio: 5 - 7 channel
          Servos: 10-11 Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder,
                                 2-Flaps, 1-Tail Steering, 1-Air Control Valve)
             Servos with a minimum 50 oz-in (3.9 kg-cm) of torque required for
            elevators, rudder and ailerons, standard servos may be used
            everywhere else
          Servo Extensions: (2) 24" Extension, (1) Dual Servo Extension
                            (4)  6" Extensions
          Y-Harness: (1) Y-harness for flaps
          Covering: seven 6-foot rolls
          Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:     84.5" (2146mm)
          Wing Area:  1245 sq in (80.3 sq dm)
          Weight:       17.5 - 19lb (7.9 - 8.6kg)
          Wing Loading: 32 - 35 oz/sq ft (98 - 107 g/sq dm)
          Length:       73.5" (1865mm)
          Airfoil: Fully-symmetrical, low-wing
          Center of Gravity: 4-9/16" (116mm) Back from the wing's leading edge
          Control Throws:         High Rate        Low Rate
            Elevator: Up & Down   9/16" (14mm)       3/8" (10mm)
            Rudder: Right to Left  1½" (38mm)          1" (25mm)
            Ailerons: Up & Down     ¾" (19mm) up       ½" (13mm) up
                                  5/8" (16mm) down   3/8" (10mm) down
            Flaps:             1-3/16" (30mm)      2-1/8" (55mm)

COMMENTS: Pilot shown inside the plane is not included.

          Following is a complete list of items required to install Robart
            retracts;
            #611-5 Pneumatic Landing Gear   ROBQ1635
            #160LWC Tail Gear Assembly      ROBQ2225
            #157VRX Air Control Kit         ROBQ2305
            #169 Pressure Tubing            ROBQ2369
            #190 Quick Disconnects          ROBQ2395
            #500 Treaded Lightweight Wheel  DUBQ0847
            Size "F" (6.5mm or 17/64" (6.8mm) drill (to enlarge wheel holes for
              axles)
            1¾" (45mm) Tailwheel  DUBQ0860
                                                                    jxs 5/18/04