This is the Tower High Torque Standard Servo with the Universal connector.
     This general purpose servo may be used in on/off-road vehicles up to
         1/8 scale, .20-.60 size sport and high performance aircraft
                        and up to .60 size helicopters.

FEATURES: New composite gear train provides very high strength plus accurate
            neutral precision and minimal backlash
          Dual ball bearings
          Three-pole Ferrite motor
          Surface Mount Technology (SMT) design for reliability in high
            vibration environments
          One year warranty

INCLUDES: One Tower High Torque Standard Servo with Univeral type connector
            one 1.7" (44mm) diameter 4 point servo horn, one 1.8" (45mm)
            diameter round servo horn, one 2.3" (59mm) long 2 point servo horn,
            one 1.3" (32mm) 1 point servo horn, 4 rubber grommets, 4 eyelets,
            four 2mm x 15mm phillips head mounting screws

REQUIRES: Installing in model and connecting to receiver

SPECS:             4.8V                 6V
          Torque: 69.4 oz-in (5 kg-cm)  83 oz-in (6 kg-cm)
          Speed:  0.18                 0.15
          Signal Pulse: Positive Pulse Control 1520us neutral
          Weight  1.8oz (51g)
          Length: 1.6" (40mm)
          Width:  0.8" (20mm)
          Height: 1.5" (39mm)
         Horn Screws: 2.6x10mm

COMMENTS: For replacement gear set use HRCM5006                    mcw 11/8/04

                                                                         ir/jxs
                                                            updated jpg 4/12/05
                                                            updated cmw 7/03/06