Get a great Fun-fly model with a great price in the Tower Hobbies Uproar 40|
model airplane kit.
Die-cut plywood and balsa wood for construction, pushrods, canopy,
control horns and miscellaneous hardware.
.32-.40 2 stroke or .40-.48 4 stroke engine, 4 channel radio with 5
servos (2 servos run the ailerons), a Y-harness, 2 rolls of covering,
miscellaneous hardware (see primary required items in the ACG),
& miscellaneous building & field equipment. Also requires a
2½" to 2¾" spinner or a prop nut.
Wing span: 48" Wing area: 578 sq in Length: 42"
Wing loading: 14-16 oz sq ft Weight: 3.5-4lbs
Center of Gravity: 3" (76.2mm) back from the wing leading edge
There are NO DECALS included. See "Notes" below.
The wing is Glued to the fuselage (not bolted)
Made of all wood
Control Throws: High Rate Low Rate
Elevator ½" up 3/8" up
½" down 3/8" down
Rudder 1" right Same as high rates
Ailerons: ¾" up 3/8" up
¾" down 3/8" down
NOTES: Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at www.towerhobbies.com for full parts listing and parts
The Purple Tower Hobbies arrow logo decal that is in the kit can
be obtained through GP Manufacturing (DECAL013).