This is a PROFILE TOWER FUN P-51D (flat fuselage) Aerobatic Airplane.
***The correct leading/edge balsa wood size is 1/4" x 1-1/4" x 24".***
***The parts list is correct.***
***In the manual on page 12, it says 1/4"x1-1/8"x24"-this is incorrect.***
FEATURES: Quick building time (approximately 24 hours).
Profile fuselage for great knife edges and 3D maneuvers.
D-tube wing with symmetrical airfoil and fully sheeted leading edge
Plywood engine mount rails for solid engine mounting.
INCLUDES: Full-Sized Rolled Plans, Photo-Illustrated Instructions, Aluminum
Main Landing Gear, Pushrods, and Basic Hardware.
REQUIRES: Radio: 4 Channel (ailerons, elevator, rudder, throttle)
Servos: 5 Standard
Y-Harness (for aileron servos)
Engine: .35-.50 (2-stroke) or .40-.52 (4-stroke)
Covering: Two 6 Foot Rolls
Misc. Items: 4oz Fuel Tank, Fuel Tubing, 2½" Main Wheels, 1"
Tailwheel, Wheel Collars, 2½" Spinner, Foam Rubber, Building and
SPECS: Wingspan: 44" (1120mm)
Wing Area: 630 sq. in. (40.6 sq dm)
Weight: 3.5-4.0lbs (1590-1810g)
Wing Loading: 13-15 oz/sq ft (40-46g/sq dm)
Fuselage length: 34.5" (880 mm)
Airfoil: Fully-Symmetrical Mid-Wing
COMMENTS: The kit is pictured on the box with Missle Red, Black, White and
There are no decals included with this kit JAL 12/17/97
Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at www.towerhobbies.com for full parts listing and parts