This is the Great Planes ElectriFly RimFire Brushless Motor.
Ideal power upgrade for smaller 3D aerobats and flat foamies.
*** One Year Limited Warranty - USA & Canada Only ***
FEATURES: "Outrunner" design eliminates need for external gear drive for many
applications
Propeller mounting system eliminates need for prop adapter for many
applications (propeller is secured to motor shaft with O-ring)
Dual ball bearings, shielded on both sides
Strong Neodymium "rare earth" magnets for high output torque and one
of the highest temperature ratings in R/C at 302°F (150°C) for
longer life
INCLUDES: One Great Planes ElectriFly RimFire Brushless Motor
Three 3x5mm standard thread, round head mounting bolts
Two 2.6x10mm standard thread, flat head hex key bolts
Six small #10 rubber O-rings
REQUIRES: Electronic Speed Control for Brushless Motors: (GPMM1800) Silver
Series SS8 8A Speed Control
**Do not attempt to operate motor with ESC designed for Brushed**
**motors. Permanent damage to motor will result.**
Installing in airplane
2mm female bullet connectors (GPMM3111) if not using SS8
SPECS: Motor Diameter and Length: 28x29mm (1.1x1.14")
Stainless Steel Output Shaft Diameter and Length: 3x12mm
Weight: 42g (1.48oz)
Input Voltage: 7.2-12V DC
Magnet Wires Temp Rating: 160°C (320°F)
kV Rating: 1000 RPM/V
Max. Constant Current: 11A
Max. Surge Current: 15A
No Load Current: .65A
Internal Resistance: 235 milli-ohms
COMMENTS: Other ESCs for Brushless motors include;
GPMM1800 SS8 8A ESC
GPMM1810 SS12 12A ESC
GPMM1820 SS25 25A ESC
GPMM1830 SS35 35A ESC
GPMM1840 SS45 45A ESC
The "22M" stands for the distance from the rear of the spinning shell
to its hub - 22mm.
The "1000" stands for RPM per Volt.
This RimFire motor is capable of handling up to 11A of current.
And ElectriFly's BL-8 ESC (GPMM2070) puts out a maximum of 8A
of current. When putting a BL-8 ESC and a RimFire motor into any
ElectriFly FlatOut airplane AND USING THE RECOMMENDED PROP, the
motor/ESC system will not need more than 8A.The motor will not
try to draw more current than the BL-8 ESC can deliver WHEN THE
CORRECT SIZE OF PROPELLER IS USED. This motor/ESC combo is matched
perfectly to the performance of the FLATOUT SERIES OF PLANES AND
THEIR RECOMMENDED PROP SIZE as well as similar type airplanes.
However, when putting a RimFire in a bigger model which WILL need
more than 8A, the BL-8 ESC is not powerful enough to deliver
the maximum current the motor requires. A larger ESC is necessary.
RECOMMENDED PROPS: For 2-cell For 3-cell LiPo
10x3.8 8x3.8
10x4.7 8x6
11x3.8 9x3.8
For a prop adapter you can use GPMQ4600. The shaft is 3mm on the
RimFire 22M1000.
jxs 2/22/05
22M/1000 info updt tjt 062205
warranty & prop info updt tjt 080905
updt jxs 9/09/05
updt rda 9/26/06
update JAW 4/13/09
Click here for Units of Measure Conversion Calculators
Yes
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
