View Larger Picture

On-line Videos:	Video 1 (17.9 MB) Video 2 (416 KB)
Tower Catalog Page:	178
E-mail This Page To A Friend

   This is the Futaba 4EXA 4-Channel Computerized FM Airplane Radio System.
               with 4 S3004 standard size, ball bearing Servos
                     and the R168DF standard size Receiver.
                 ***This Radio does not have PCM Capabilities***
                  ***THIS RADIO CONTAINS NO HELI PROGRAMMING***

FEATURES: Four model memory
          Exponential for ailerons, elevator and rudder
          Wing mixing function for V-tail and elevons
          40-segment LCD screen
          Servo reversing
          Analog trims with trim memory
          End Point Adjustment (EPA) on all 4 channels
          Data reset
          Trainer system
          Low battery alarm
          Trainer box capable (trainer cord sold separately, see COMMENTS).
          One year limited warranty

INCLUDES: Futaba 4EXA Transmitter with transmitter and receiver crystals
          R168DF Receiver
                 Receiver NiCd Battery: FUTM1295
                 Transmitter Battery:   FUTM1440
          Charger: FUTM1830
          Four S3004 Servos: FUTM0004
          One Bag Servo Mounting Hardware: FUTM3551
          SWH-13 Switch Harness: FUTM4370
          ANT-5 Transmitter Antenna: FUTM5040
          Transmitter strap: FUTM5690
          Servo Extension: FUTM3910
          Servo Tray
          Freq Flag

REQUIRES: Installing servos and receiver and charging batteries

SPECS:    4EX Transmitter
            Modulation: FM (Frequency Modulation)
            Power Supply: 9.6V NT8S600B NiCd battery or 12V alkaline battery
            Current Drain: 250mA

          S3004 Servos (4)
            Speed:   .23 sec/60° @ 4.8V
                     .19 sec/60° @   6V
            Torque:  44 oz-in (3.2 kg-cm) at 4.8V
                     57 oz-in (4.1 kg-cm) at   6V
            Length: 1.6" (41mm)
            Width:   .8" (20mm)
            Height: 1.4" (36mm)
            Weight: 1.3 ounce (37.2 grams)
            Connector: "J" type with approx. 5" wire

          R168DF Receiver
            Narrow Band: 20kHz
            Intermediate Frequency- 1st IF: 10.7MHz
            Power Requirements: 4.8 to 6V (shared with servos)
            Current Drain: 10mA
            Dimensions: 1.1 x 2.2 x .8" (28.5 x 55.5 x 19.8mm)
            Weight: 1.0oz (28g)

COMMENTS:  If using as a trainer radio, one of the following trainer cords will
             be needed;
             9C to FM FUTM4420 trainer cord to connect to standard trainer port
             9C to 9C FUTM4415 trainer cord when using a 9C or another 4EXA

                                                                    jpg 8/31/05
                                                                         ir/jxs
                                                            updated jpg 1/17/06



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators