This is the radio controlled, electric powered, foam
Great Planes ElectriFly FlatOuts R/C Universe Profile Park Flyer Biplane.
Park Pilot Program Legal Aircraft
For Intermediate to Advanced Modeler/Fliers.
FEATURES: Construction: 1/8" (3mm) thick foam with carbon fiber reinforcing
rods to strengthen the infrastructure,
Trim: White, Red, Black and Silver with the RC Universe Logo spanning
the top wing and decorating the lower wing and the fin and rudder
Wings: 1/8" (3mm) thick foam with with carbon fiber leading edge
and trailing edge reinforcement
Landing Gear: 5/64" (2mm) diameter carbon rod landing gear legs
with 1.05" (27mm) diameter wheels (Black plastic with rubber tire)
Tailwheel: .40" (10mm) diameter, plastic construction
Wheel Pants: foam construction, profile design
Building Time: Flight ready in 2-3 hours
Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
on tail section allows up to 80° of deflection without binding and
also pops loose in the event of a crash
Pushrods: 1mm diameter, carbon fiber construction
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.
INCLUDES: Great Planes R/C Universe foam 3D airplane, carbon fiber rods,
complete hardware package and photo-illustrated manual
REQUIRES: Speed Control: 8A for Brushless motors - GPMM1800
Battery: 640mAh Lithium Polymer (LiPo) battery
Motor: Direct Drive Brushless - GPMG4525
Propeller: 10x3.5 - GPMQ6655
Propeller Adapter: Included with Great Planes RimFire Motor
Charger: Lithium Polymer-capable, Great Planes TRITON series
Receiver: Ultra micro size
Servos: 3 micro with a 15+ oz-in minimum torque rating
Misc. Items: Foam-safe CA, building and field equipment
SPECS: Wingspan: 30.7" (780mm)
Wing Area: 412 sq in (26.6 sq dm)
Weight: 10.6oz (300g)
Wing Loading: 3.9 oz/sq ft (10-12 g/sq dm)
Length: 33.5" (850mm)
Airfoil: Flat plate
Center of Gravity: 3¼" (83mm) Back from the wing's leading edge
at the fuselage sides.
COMMENTS: The propeller and prop adapter listed as replacement parts in the
manual are not included and must be purchased separately.
To simplify setup, the high-rate (3D) control throws for this model
are automatically set by the geometry of the included hardware.
If your radio has the capability, low-rates will make it easier to
perform precision aerobatics. Great Planes recommends 40% endpoints
for all low-rate throws. If your radio does not have low-rates, set
up the model using only the high-rate throws.