Great Planes RC Universe Biplane FlatOuts 3D ARF 30.6"

Tower Stock# LXLVA8  •  Manufacturer Stock# GPMA1117
Great Planes RC Universe Biplane FlatOuts 3D ARF 30.6
Notes from our tech department:
This is the radio controlled, electric powered, foam
Great Planes ElectriFly FlatOuts R/C Universe Profile Park Flyer Biplane.
Park Pilot Program Legal Aircraft
For Intermediate to Advanced Modeler/Fliers.

FEATURES

Construction: 1/8" (3mm) thick foam with carbon fiber reinforcing
rods to strengthen the infrastructure,
Trim: White, Red, Black and Silver with the RC Universe Logo spanning
the top wing and decorating the lower wing and the fin and rudder
Wings: 1/8" (3mm) thick foam with with carbon fiber leading edge
and trailing edge reinforcement
Landing Gear: 5/64" (2mm) diameter carbon rod landing gear legs
with 1.05" (27mm) diameter wheels (Black plastic with rubber tire)
Tailwheel: .40" (10mm) diameter, plastic construction
Wheel Pants: foam construction, profile design
Building Time: Flight ready in 2-3 hours
Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
on tail section allows up to 80 of deflection without binding and
also pops loose in the event of a crash
Pushrods: 1mm diameter, carbon fiber construction
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES

Great Planes R/C Universe foam 3D airplane, carbon fiber rods,
complete hardware package and photo-illustrated manual

REQUIREMENTS

Speed Control: 8A for Brushless motors - GPMM1800
Battery: 640mAh Lithium Polymer (LiPo) battery
Motor: Direct Drive Brushless - GPMG4525
Propeller: 10x3.5 - GPMQ6655
Propeller Adapter: Included with Great Planes RimFire Motor
Charger: Lithium Polymer-capable, Great Planes TRITON series
Radio: 4-channel
Receiver: Ultra micro size
Servos: 3 micro with a 15+ oz-in minimum torque rating
Misc. Items: Foam-safe CA, building and field equipment

SPECIFICATIONS

Wingspan: 30.7" (780mm)
Wing Area: 412 sq in (26.6 sq dm)
Weight: 10.6oz (300g)
Wing Loading: 3.9 oz/sq ft (10-12 g/sq dm)
Length: 33.5" (850mm)
Airfoil: Flat plate
Center of Gravity: 3" (83mm) Back from the wing's leading edge
at the fuselage sides.

COMMENTS

The propeller and prop adapter listed as replacement parts in the
manual are not included and must be purchased separately.

To simplify setup, the high-rate (3D) control throws for this model
are automatically set by the geometry of the included hardware.
If your radio has the capability, low-rates will make it easier to
perform precision aerobatics. Great Planes recommends 40% endpoints
for all low-rate throws. If your radio does not have low-rates, set
up the model using only the high-rate throws.

kpm02/22/2006

Resources
Know Before You Fly
Easy RC: Airplanes
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐