Instruction Manuals:	Manual 1 (1.2 MB)
Parts Express Eligible:	Yes
E-mail This Page To A Friend

             This is the Futaba Multi-Proportional System Decoder.
     This will work with the 14MZ and FX40. It will also work with the
         12FG and 12Z if you have the update version of 1.31 or more.
                   This does not work in FASST mode.

FEATURES: Perfect for adding more functions to large-scale planes, jets and
            helis
          Plugs into one channel of any Futaba FM, PCM G3 or PCM 1024
            receiver and provides an additional seven channels
          All added channels are fully proportional, switch selectable and
            feature endpoint adjustment (ATV) and failsafe
          Easy to set up; preset for PCM 2048 resolution
          Servo operation of 8 channels is possible with 1 channel
          Linear operation
          Servo operation speed of each channel can be set
          Fail-Safe for each channel can be set
          14MZ/FX-40 can accommodate up to 2 multi-proportional decoders
            Channel expansion up to 28 channels is possible with the R5014DPS
            receiver
          Operating control setting, direction of operation change, and travel
            possible for each multi-prop expanded channel

INCLUDES: Futaba Multi-Proportional System Decoder.

REQUIRES: Futaba 14MZ or FX-40 system using FM, PCM G3 or PCM 1024 receiver
          Also 12FG or 12Z with software version of at least 1.31.

SPECS:    Dimensions: 29.6x39.3x15.8mm
          Weight: 14.2g
          Operation power requirement: 4.8 or 6.0V (4~5 NiCad batteries)
          Current drain: 7.5mA
          Number of multi-prop output channels: 8
          Applicable modulation modes: PCM G3, PCM1024, PPM
          Multiplexing scheme: Pulse width division (PCM G3, PCM1024), time
             division (PPM)
          Delay function: Programmable for each channel
          Fail-safe function: F/S function/HOLD function can be selected for
             each channel.

                                                                    jxs 6/20/06
                                                              updated08/10/06kh



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators