View Larger Picture

Tower Catalog Page:	177
E-mail This Page To A Friend

        This is the Futaba 3PK Super Pistol Grip 3 Channel Transmitter
           This Version Does Not Include Module, Servos or Receiver.

FEATURES: Upgrades over the original 3PK include;
          Expanded Driver Menu, with "New Driver" "Race-Ready" and "Expert"
            menus and a mid-level "Big" menu for drivers of 1/5 scale and
            larger vehicles
          Redesigned Keypad, with jog button giving access to four different
            directions by moving button left, right, up or down and then
            pushing in
          Vibrating Alert System, functions like a timer to let driver know
            when to bring a nitro car in for a pit stop or check battery life
            of electric model
          Increased Model Memory, 20 models also compatible with CAMPac module
            that adds another 10 models
          Throttle Mode Select, choice of two servo neutral points 70/30 for
            nitro models and 50/50 model for electrics

          Features unchanged from the original 3PK include;
          APA (Advanced Positioning Adapter) for customizing balance and
            wheel position
          Large Backlit LCD Screen with adjustable contrast and 128 x 64
            resolution
          "Direct Select" single button access to 8 preassigned functions
          Adjuster feature restores compromised settings to factory default
          Assignable switch and dial functions
          10 Digit Model and user naming: English or Japanese characters
          PCM/PPM/HRS Selectable with 3-ch adjustable FailSafe for PCM/HRS
          3 Function selection modes (New User, Race Ready Driver and Expert
               provide 1/2/3 menus of features for just the right fit!)
               PLUS the direct selection 2-key menu to up to 6 functions.
          Steering Dual Rate and Dual Rate 2, both adjustable while driving
          Servo display to show all 3 servo positions for easy setup/diagnostic
          Anti-Skid Brake System (ABS) (Keeps tires from skidding, or
            locking-up, even on gas cars) (with 5 adjustments)
          Throttle Acceleration (decreases lag time before clutch or brakes
            are engaged)
          Steering and throttle exponential (3 forward expo types)
          end point adjustments for all 3 channels (EPA/ATV)
          Steering and Throttle servo speed limiters
          Brake mixing for 1/5th scale cars with separate front and rear brakes
          System adjustments for back lighting, pilot lamp color, home display
          Servo Reversing
          Idle-up for easy starts and engine cut for boat engine shut off
          In addition to great performance in R/C car and truck applications,
            this system is also ideally suited to the rigors of boat racing
          Start (Preset throttle start control. Limits throttle at the
            beginning of a race to give smoother acceleration and less wheel
            slip.) (similar to traction control on 3PJS)
          Advanced timer w/100 lap recall & trigger activation
          Trim/dial function selection (can assign different functions to the
            different trim controls and dials)
          Subtrim adjustments
          Step trim adjustments (allows changing of trims in finer increments)
          Programmable mixing
          Tilt mixing for adjusting the trim tabs with the 3rd channel on boats
          Third channel assignable to any dial/switch/trimmer/mix
          MC-SETUP function for HRS receivers to properly setup ESCs
          ADJUSTER function to manually calibrate trigger and wheel

  EQUIPMENT FEATURES:
         Optional DSC cord support for operating receivers without transmitting
         LARGE REAR Facing LCD plus Seven Color Pilot Lamp for easy ID.
         One Year Warranty
         Digital trim with reset
         Left Hand reversible
         Steering wheel tension adjust (can be adjusted without opening radio)
         Trigger stop function (mechanical ATL) and programmable ATL
         Display switch (allows functions to be set without transmitting)
         Audible, adjustable alarm tone and lap counting tones
         Headphone jack for hearing the alarm tones at a noisy track

INCLUDES: 3PK Super Transmitter with antenna
          Transmitter NiCd NT8F700B, FUTM1462
          Switch Harness, FUTM4350
          Offset wheel adapter and screws
          Instruction manual and warranty card
          Hex wrench
          Charger FBC-19B(4), FUTM1830

OPTIONAL: * Campac 16K, 10 Model Memory, FUTM9405
          * DSC cord-To use the DSC function use-DSC Cord, FUTM4245
          * MC SETUP cord
          * Dry cell transmitter battery case, FUTM1563

REQUIRES: Transmitter Module
          Digital servos (if using in HRS mode)
          Receiver: Futaba R203HF, FUTL0344
          Receiver Crystal: FUTL52**, must match channel of crystal in module
          Receiver NiCd battery

SPECS:    Operating System: FM/PPM, HRS_FM or PCM1024 switchable
          Transmitting Frequency: 27MHz
          Power Supply: 9.6V NiCd
          Current Drain: 250mA or less

COMMENTS: This radio is sold without servos and REQUIRES DIGITAL SERVOS ONLY
            and 6V when using an HRS receiver. Non-digital servos are fine on
            PPM/PCM.

                                                                    jxs 2/06/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators