View Larger Picture

Instruction Manuals:	Manual 1 (1.9 MB) Manual 2 (122 KB)
Tower Catalog Page:	179
E-mail This Page To A Friend

         This is the Futaba 6EXP 6 channel FM Computer Radio System
              with programming for Airplane and Helicopter use.
        Includes the R156F 6-Channel Micro FM Receiver and NO Servos.

    This radio is diode protected to prevent overcharging, which means the
          battery cannot be discharged through the transmitter.

AIRPLANE FEATURES:
          Standard programming features include all channel servo reversing,
            End point adjustment (EPA) on all channels, dual rates, exponential
            flaperon, V-tail, elevon, and wing type selection
          Transmitter controls include Throttle Cut Switch-stops engine
            when flipped twice within one second, Trainer Switch-controls link
            between instructor and student transmitters, Retract Switch-
            controls operation of retractable landing gear or other feature,
            Dual Rate Switch-reduces servo travel and switches' exponential
            curve
          Dual rate switch allows high or low rate of movement of flap servo to
            slow airplane when coming in for a landing
          Adjustable flaperon rates
HELICOPTER FEATURES:
          Multiple swash plate styles, data reset, trainer capability, EPA,
            exponential and digital trims
          Data Input Lever allows easy setting of end points and rates for all
            six channels
          Five-point adjustment with two curves on both Throttle Curve, Pitch
            Curve, Normal and Idle Up
          Rate selection on both gyro mixing and revo mixing
          Throttle Hold switch for performing autorotation maneuvers and
            reducing idle for starting
GENERAL FEATURES:
          Six model memory, four character model naming
          Small speaker in face plate emits audio alarms
          Adjustable stick length
          Digital Trims
          Modulation PCM/PPM (FM) switchable
          Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXP Super Computer Radio system with:
          Transmitter Crystal
          R156F 6-Channel Receiver with crystal  FUTL0641
          NT8F600B Transmitter Battery       FUTM1440
          FBC-19B (4) Charger                FUTM1830
          SWH-13 Switch Harness              FUTM4370
          Neck Strap                         FUTM5690
          Frequency Flag Set

REQUIRES: Servos (number and type depending on aircraft)

SPECS:    Receiver-R156F
            Type: Dual conversion
            Dimensions: 1.3 x .51 x .84" (33 x 13 x 21mm)
            Weight: .36oz (10.2g)
          Transmitter-
            Current Drain: 10mA (at no signal)

COMMENTS: If using as a trainer radio, one of the following trainer cords will
           be needed;
           9C to FM FUTM4420 trainer cord to connect to standard trainer port
           9C to 9C FUTM4415 trainer cord when using a 9C or another 6EXP

                                                                    jxs 8/30/07
                                                                         ir/jxs



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators