This is the 3-Channel Futaba 3GR-FS 2.4 GHz Two-Stick Radio for Surface Use
               with the R603FF 2.4GHz FASST 3-Channel Receiver.
            Virtually Identical to the 3PM but in a stick version.
             Transmitter and receiver only, servos not included.

FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as
            much information to the receiver at eight times the resolution of
            standard systems for unsurpassed control and smooth servo travel
          2.4GHz circuitry is wired directly into transmitter eliminating
            separate plug-in modules
          "Auto Detect" instantly determines whether HRS or PPM mode is active
            in the transmitter
          Pre-Vision scans incoming data and applies sophisticated error
            correction techniques resulting in a system that provides a
            solid impenetrable connection to the model
          Transmitter has charge jack for optional rechargeable AA batteries.

          Programming Features:
          Throttle stick adjustment (70/30 for nitro, 50/50 for electric)
          Steering/Throttle trim, trim rate, dual rate and exponential
          Steering/Throttle/3rd Channel reverse, EPA and sub trim
          Steering Speed
          Throttle ATL
          Mechanical ATL
          ABS Braking
          Brake mixing for large cars
          Throttle acceleration
          One programmable mix
          Condition change mixing
          Up/down timer
          100-lap memory
          Fail safe
          10 Model Memory

          In addition to great performance in R/C car and truck applications,
            this system is also ideally suited to the rigors of boat racing

INCLUDES: Futaba 3GR-FS 2.4 GHz 3-channel Transmitter
          R603FF 3-channel Receiver (FUTL7631)
          Switch Harness with J-Connector (FUTM4382)

REQUIRES: AA Batteries: Eight for transmitter
          Servos and receiver battery of modeler's choice

SPECS:    3GR-FS 2.4 GHz Transmitter;
            Current Drain: 250mA or less

          R603FF Receiver
            Reception Antenna: External
            Power Requirement: 6V NiCd battery
            Size: 1.5 x 1 x .55" (39 x 26 x 14mm)
            Weight .45oz (12.8g)

COMMENTS: If wanting to use rechargeable batteries, you can use any
            AA Nicds you choose.
          Order FUTM1830 for wall charger

                                                                   jxs 11/15/07
                                                                         ir/jxs
                                                             updated 1/07/09kzh